C1013 Ford Code - Brake System Pressure
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the overall brake system pressure. Common causes include Brake fluid leaks, Faulty Brake Fluid Pressure Sensor, Brake Fluid Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1013 Ford indicates Brake System Pressure.
- Common causes
- Common causes include Brake fluid leaks, Faulty Brake Fluid Pressure Sensor, Brake Fluid Pressure Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1013 Ford Description
What are the Possible Causes of the DTC C1013 Ford?
- Brake fluid leaks
- Faulty Brake Fluid Pressure Sensor
- Brake Fluid Pressure Sensor harness is open or shorted
- Brake Fluid Pressure Sensor circuit poor electrical connection
How to Fix the DTC C1013 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1013 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1013 Ford code?
Need more information on how to fix the C1013 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1013 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1013 Ford Code
1. What does the OBDII code C1013 mean on a Ford vehicle?
C1013 indicates an issue with the brake system pressure sensor, which monitors hydraulic brake pressure and ensures proper braking performance.
2. What are the common symptoms of the C1013 code on a Ford?
Symptoms may include an illuminated ABS or brake warning light, reduced braking performance, or a spongy brake pedal feel.
3. What causes the C1013 code to appear on a Ford vehicle?
Common causes include a faulty brake pressure sensor, damaged wiring or connectors, low brake fluid levels, or air in the brake lines.
4. Can you drive a Ford vehicle with the C1013 code?
It is not recommended to drive with this code active, as it may affect braking performance and compromise safety.
5. How do you diagnose the C1013 code on a Ford?
Diagnosis involves scanning for codes, inspecting the brake pressure sensor, checking wiring and connectors for damage, and verifying brake fluid levels.
6. How do you fix the C1013 code on a Ford?
Repairs may include replacing a faulty brake pressure sensor, repairing damaged wiring, bleeding the brake system, or refilling brake fluid.
7. Does the C1013 code always indicate a faulty brake pressure sensor?
No, it can also be caused by wiring issues, low brake fluid, or other brake system malfunctions.
8. How much does it cost to repair the C1013 code on a Ford vehicle?
Repair costs can vary but typically range from $100–$400 depending on whether the sensor, wiring, or other components need replacement.
9. Can a low brake fluid level trigger the C1013 code?
Yes, low brake fluid can affect system pressure and potentially trigger this code.
10. What tools are required to troubleshoot the C1013 code on a Ford?
You’ll need an OBDII scanner, a multimeter for electrical testing, and basic tools for inspecting and repairing brake system components.
Discuss the causes and fixes for C1013 Ford OBDII Code
Code C1013 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
