C1002 Dodge Code - Brake Switch Stuck High
Quick Answer
The Totally Integrated Power Module (TIPM) monitors the Primary Brake Switch Signal Circuit Brake Lamp Switch Output Circuit for three minutes once the set conditions have been met. Common causes include Faulty Brake Pedal Switch, Brake Pedal Switch harness is open or shorted, Brake Pedal Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1002 Dodge indicates Brake Switch Stuck High.
- Common causes
- Common causes include Faulty Brake Pedal Switch, Brake Pedal Switch harness is open or shorted, Brake Pedal Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1002 Dodge Description
What are the Possible Causes of the DTC C1002 Dodge?
- Faulty Brake Pedal Switch
- Brake Pedal Switch harness is open or shorted
- Brake Pedal Switch circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How to Fix the DTC C1002 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1002 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1002 Dodge code?
Need more information on how to fix the C1002 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1002 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1002 Dodge Code
1. What are the common symptoms of OBDII code C1002 "Brake Switch Stuck High" in a Dodge vehicle?
When this code is triggered, you may experience issues such as the brake lights staying on continuously, difficulty shifting out of park, or the cruise control not functioning properly.
2. What can cause the OBDII code C1002 "Brake Switch Stuck High" in a Dodge?
The most common causes of this code include a faulty brake light switch, a misadjusted brake light switch, or wiring issues in the brake light circuit.
3. How can I diagnose the OBDII code C1002 "Brake Switch Stuck High" in my Dodge?
You can start by checking the brake light switch for proper operation and adjustment. Inspect the wiring for any damage or loose connections. Using an OBDII scanner to read and clear the code can also help in diagnosing the issue.
4. Can I still drive my Dodge with the OBDII code C1002 "Brake Switch Stuck High" present?
It is not recommended to drive your vehicle with this code active, as it can affect the proper functioning of the brake lights and other critical safety features.
5. How can I repair the OBDII code C1002 "Brake Switch Stuck High" in my Dodge?
To repair this issue, you may need to replace the brake light switch if it is found to be faulty. Adjusting the switch properly or repairing any damaged wiring can also resolve the problem.
6. Will resetting the OBDII code C1002 "Brake Switch Stuck High" make it go away permanently?
Resetting the code may temporarily clear the warning light, but if the underlying issue with the brake light switch or wiring is not addressed, the code is likely to reappear.
7. Are there any safety concerns associated with the OBDII code C1002 "Brake Switch Stuck High" in a Dodge?
Yes, driving with this code can pose safety risks as it may lead to unpredictable brake light behavior, potentially causing accidents due to other drivers not being able to anticipate your braking.
8. Can I fix the OBDII code C1002 "Brake Switch Stuck High" in my Dodge myself, or do I need professional help?
If you have experience working on automotive electrical systems, you may be able to diagnose and repair this issue yourself. However, if you are unsure or uncomfortable with electrical work, it's best to seek professional help.
9. How much does it cost to repair the OBDII code C1002 "Brake Switch Stuck High" in a Dodge?
The cost of repairing this issue can vary depending on the root cause of the problem and whether you choose to do the repairs yourself or take your vehicle to a professional mechanic. Costs may include parts and labor.
10. Is the OBDII code C1002 "Brake Switch Stuck High" specific to Dodge vehicles, or can it occur in other car makes as well?
While this particular OBDII code is associated with Dodge vehicles, similar issues with the brake light switch can occur in other car makes and models, triggering their own specific diagnostic trouble codes.
Discuss the causes and fixes for C1002 Dodge OBDII Code
-
I have a c1002 code on a 2007 dodge caliber, checked connections, the brake pedal switch also the harness and the brake lights fully work. Would the brake lights still come on if the TIPM was throwing the code?
-
Would the brake lights still come on if the TIPM was throwing the code?
Yes, the TIPM only monitors the signal, but does not control the brake light. Here is the diagram:
Click here to enlarge image
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
