C1000 Chrysler Code - Brake Pedal Switch 1 Circuit Performance
Quick Answer
The Totally Integrated Power Module (TIPM) monitors the Primary Brake Switch Signal Circuit Brake Lamp Switch Output Circuit for three minutes once the set conditions have been met. Common causes include Faulty Brake Pedal Switch 1, Brake Pedal Switch 1 harness is open or shorted, Brake Pedal Switch 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1000 Chrysler indicates Brake Pedal Switch 1 Circuit Performance.
- Common causes
- Common causes include Faulty Brake Pedal Switch 1, Brake Pedal Switch 1 harness is open or shorted, Brake Pedal Switch 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1000 Chrysler Description
What are the Possible Causes of the DTC C1000 Chrysler?
- Faulty Brake Pedal Switch 1
- Brake Pedal Switch 1 harness is open or shorted
- Brake Pedal Switch 1 circuit poor electrical connection
- Faulty Totally Integrated Power Module (TIPM)
How to Fix the DTC C1000 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1000 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1000 Chrysler code?
Need more information on how to fix the C1000 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1000 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1000 Chrysler Code
1. What does the OBDII code C1000 mean on a Chrysler vehicle?
The code C1000 indicates an issue with the performance of the Brake Pedal Switch 1 Circuit, which monitors the brake pedal position for proper operation of braking and related systems.
2. What are common symptoms of the C1000 code in a Chrysler?
Symptoms may include brake lights not working, cruise control malfunction, ABS or traction control warning lights, and erratic shifting in automatic transmissions.
3. What causes the C1000 Brake Pedal Switch 1 Circuit Performance code?
Common causes include a faulty brake pedal switch, damaged or corroded wiring, poor electrical connections, or a malfunctioning brake light bulb or circuit.
4. Can I drive my Chrysler with the C1000 code active?
It’s possible to drive, but it’s not recommended since issues like brake light failure or problems with the ABS or cruise control could compromise safety.
5. How do I diagnose the C1000 code?
Start by inspecting the brake pedal switch and its wiring for damage or corrosion. Use a multimeter to test the switch's functionality and check for proper voltage in the circuit.
6. How is the C1000 code typically fixed?
Repairs may include replacing the brake pedal switch, repairing damaged wiring, cleaning electrical connections, or replacing faulty brake light bulbs.
7. What tools are needed to fix the C1000 code?
You may need a multimeter, a scan tool capable of reading Chrysler-specific codes, and basic tools to access and replace the brake pedal switch or wiring.
8. How much does it cost to fix the C1000 code on a Chrysler?
The repair cost can range from $50 to $250, depending on whether you need a new brake pedal switch, wiring repairs, or professional diagnostic labor.
9. Can a faulty brake pedal switch cause other issues?
Yes, a faulty brake pedal switch can affect systems like the ABS, traction control, cruise control, and even the transmission’s ability to shift properly.
10. Will clearing the C1000 code solve the issue?
Clearing the code without addressing the underlying problem will not fix the issue. The code will likely reappear until the root cause is resolved.
Discuss the causes and fixes for C1000 Chrysler OBDII Code
Code C1000 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
