AutoCodes – GMC – C0760 2017 GMC Sierra

C0760 2017 GMC Sierra Code - Left Rear Low Tire Pressure Sensor

Quick Answer

The Tire Pressure Monitor System (TPMS) has a Radio Frequency (RF) transmitting pressure sensor in each wheel/tire assembly. Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Left Rear Low Tire Pressure Sensor, Left Rear Low Tire Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0760 2017 GMC Sierra indicates Left Rear Low Tire Pressure Sensor.
Common causes: Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Left Rear Low Tire Pressure Sensor, Left Rear Low Tire Pressure Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 187

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 17, 2023

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0760 2017 GMC Sierra Description

The Tire Pressure Monitor System (TPMS) has a Radio Frequency (RF) transmitting pressure sensor in each wheel/tire assembly. As vehicle speed increases, centrifugal force puts the sensor into Drive mode. The sensors send the tire pressure data to the Remote Control Door Lock Receiver (RCDLR) which in turn translates the received sensor data into sensor presence, sensor mode, and tire pressure before passing it onto the Body Control Module (BCM). Once vehicle speed is greater than 40 km/h (25 MPH), the BCM waits for the first sensor to go into Drive mode, then checks if all sensors have gone into Drive mode. If one or more sensors do not go into these modes or do not transmit at all, the BCM will set DTC C0750, C0755, C0760, or C0765 respectively.

OBDII Code C0760 2017 GMC Sierra - Left Rear Low Tire Pressure Sensor - AutoCodes.com — C0760 2017 GMC Sierra Code - Left Rear Low Tire Pressure Sensor

What does this mean?

What are the Possible Causes of the DTC C0760 2017 GMC Sierra?

Perform the Tire Pressure Indicator Sensor Learn
Faulty Left Rear Low Tire Pressure Sensor
Left Rear Low Tire Pressure Sensor harness is open or shorted
Left Rear Low Tire Pressure Sensor circuit poor electrical connection

How to Fix the DTC C0760 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

A sensor may have been damaged due to a previous wheel/tire service or flat tire event.
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0760 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0760 2017 GMC Sierra code?

Need more information on how to fix the C0760 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0760 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0760 2017 GMC Sierra Code

1. What does OBDII code C0760 for a 2017 GMC Sierra indicate?

The C0760 code specifically refers to a fault detected in the left rear low tire pressure sensor of the vehicle.

2. What are some common symptoms of a left rear low tire pressure sensor issue in a 2017 GMC Sierra?

Common symptoms may include inaccurate tire pressure readings for the left rear tire, a tire pressure warning light on the dashboard, or a message indicating a sensor fault.

3. What are the possible causes of the C0760 code in a 2017 GMC Sierra?

The code can be triggered by a faulty left rear tire pressure sensor, damaged sensor wiring, low tire pressure in the left rear tire, or issues with the tire pressure monitoring system (TPMS).

4. How can I diagnose a left rear low tire pressure sensor problem in my 2017 GMC Sierra?

Diagnosis typically involves checking the tire pressure in the left rear tire, inspecting the sensor and its wiring for damage, and using a TPMS diagnostic tool to identify the specific issue.

5. Can I still drive my 2017 GMC Sierra with a C0760 code?

While it is generally safe to drive with this code, it is important to address the underlying issue promptly to ensure accurate tire pressure monitoring and safe driving conditions.

6. How can I repair a left rear low tire pressure sensor issue in my 2017 GMC Sierra?

Repair options may include replacing the faulty sensor, repairing damaged wiring, inflating the left rear tire to the correct pressure, or resetting the TPMS system after addressing the problem.

7. Can I reset the C0760 code in my 2017 GMC Sierra without fixing the issue?

Resetting the code without addressing the underlying problem may temporarily clear the warning but will not resolve the sensor issue or ensure accurate tire pressure monitoring.

8. Is it possible to prevent left rear low tire pressure sensor problems in my 2017 GMC Sierra?

Regularly checking tire pressure, maintaining proper inflation levels, and addressing any TPMS warnings promptly can help prevent sensor issues and ensure optimal tire performance.

9. How much does it cost to repair a left rear low tire pressure sensor problem in a 2017 GMC Sierra?

Costs can vary depending on the specific issue, but replacing a faulty sensor or repairing wiring typically ranges from $50 to $200, excluding labor costs.

10. Can a DIY enthusiast replace a left rear low tire pressure sensor in a 2017 GMC Sierra?

While it is possible for experienced DIYers to replace the sensor, it is recommended to consult the vehicle's manual or seek professional assistance to ensure proper installation and calibration.