C0760 2015 Chevrolet Silverado Code - Left Rear Low Tire Pressure Sensor
Quick Answer
The Tire Pressure Monitor System (TPMS) has a Radio Frequency (RF) transmitting pressure sensor in each wheel/tire assembly. Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Left Rear Low Tire Pressure Sensor, Left Rear Low Tire Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0760 2015 Chevrolet Silverado indicates Left Rear Low Tire Pressure Sensor.
- Common causes
- Common causes include Perform the Tire Pressure Indicator Sensor Learn, Faulty Left Rear Low Tire Pressure Sensor, Left Rear Low Tire Pressure Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0760 2015 Chevrolet Silverado Description
What are the Possible Causes of the DTC C0760 2015 Chevrolet Silverado?
- Perform the Tire Pressure Indicator Sensor Learn
- Faulty Left Rear Low Tire Pressure Sensor
- Left Rear Low Tire Pressure Sensor harness is open or shorted
- Left Rear Low Tire Pressure Sensor circuit poor electrical connection
How to Fix the DTC C0760 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Some aftermarket wheel valve stem holes are located further from the wheel rim than the original equipment wheels. When using the tire pressure monitor special tool to activate a sensor, ensure the tool is placed along the tire sidewall and no further than 15 cm (6 in) from the sensor and the antenna is aiming upward.
Occasionally sensors can become mislocated due to previous tire rotations where the sensor learn procedure was not performed. Always learn the sensors to ensure the DTC set is for that actual physical corner of the vehicle.
A sensor with low battery condition will set a sensor DTC but will not illuminate the low tire pressure indicator or display a message on the driver information center if equipped. The sensor battery condition can be verified in the scan tool BCM data list. If a sensor's low battery condition is indicated on the scan tool, the sensor will need to be replaced.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0760 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0760 2015 Chevrolet Silverado code?
Need more information on how to fix the C0760 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0760 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0760 2015 Chevrolet Silverado Code
1. What does the OBDII code C0760 mean on a 2015 Chevrolet Silverado?
C0760 indicates an issue with the left rear tire pressure sensor, typically related to low tire pressure or a malfunction in the sensor itself.
2. What are the common symptoms of code C0760 on a 2015 Chevrolet Silverado?
Symptoms include a low tire pressure warning light on the dashboard, inaccurate tire pressure readings, or the inability to read the left rear tire pressure.
3. What causes the C0760 code to appear?
Common causes include an actual low tire pressure in the left rear tire, a faulty tire pressure monitoring sensor (TPMS), a dead sensor battery, or interference with the sensor signal.
4. Can driving on low tire pressure cause the C0760 code?
Yes, driving on low tire pressure can trigger the code, as the TPMS detects and reports the pressure drop in the left rear tire.
5. How do you fix the C0760 code on a 2015 Chevrolet Silverado?
First, check and inflate the left rear tire to the recommended pressure. If the issue persists, inspect or replace the left rear tire pressure sensor as needed.
6. How do I reset the C0760 code after repairs?
After correcting the issue, you can reset the code by driving the vehicle for a short distance or using an OBDII scanner to clear the fault code.
7. Can a dead TPMS sensor battery cause the C0760 code?
Yes, a dead or weak TPMS sensor battery can prevent the sensor from transmitting data, resulting in the C0760 code.
8. How much does it cost to replace a faulty tire pressure sensor?
Replacing a TPMS sensor typically costs between $50 and $150 per sensor, depending on the part and labor rates.
9. Can I ignore the C0760 code if the tire seems fine?
It’s not recommended to ignore the code, as it could indicate a failing sensor or an intermittent issue, compromising your ability to monitor tire pressure accurately.
10. Do I need to reprogram the TPMS after replacing the sensor?
Yes, after replacing the sensor, the new TPMS needs to be reprogrammed to communicate with your vehicle’s system. This can be done with a TPMS relearn tool or by a professional.
Discuss the causes and fixes for C0760 2015 Chevrolet Silverado OBDII Code
Code C0760 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
