AutoCodes – Chevrolet – C0710 Chevrolet

C0710 Chevrolet Code - Steering Position Signal

Quick Answer

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0710 Chevrolet indicates Steering Position Signal.
Common causes: Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 45,645

How popular is this code, among other codes? Medium

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 17, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0710 Chevrolet Description

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). The Electronic Brake Control Module receives serial data inputs from the Steering Wheel Angle Sensor identifying the position and direction of the steering wheel rotation. The Electronic Brake Control Module utilizes this signal to calculate the driver's intended driving direction. The Diagnostic Trouble Code (DTC) will be set when the Steering Wheel Angle Sensor signal is invalid.

OBDII Code C0710 Chevrolet - Steering Position Signal - AutoCodes.com — C0710 Chevrolet Code - Steering Position Signal

What does this mean?

What are the Possible Causes of the DTC C0710 Chevrolet?

Steering Wheel Angle Sensor Centering (Calibration)
Faulty Steering Wheel Angle Sensor
Steering Wheel Angle Sensor harness is open or shorted
Steering Wheel Angle Sensor circuit poor electrical connection
Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0710 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Confirm that all tires are of the proper size and that all are matching brands. Check and adjust all tires to the stated cold air pressure as identified on the tire placard. If a miss sized or non-matching brand tire is present, inform the customer that in order for the vehicle stability enhanced system to function normally, tires need to be a uniform size and rolling diameter.

Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.

C0710:09 Steering Position Signal Too Fast Transitions
C0710:0A Steering Position Signal Too Slow Transitions
C0710:11 Steering Position Signal High Input
C0710:18 Steering Position Signal Low Signal Amplitude
C0710:19 Steering Position Signal High Signal Amplitude
C0710:42 Steering Position Signal Calibration Not Programmed
C0710:4B Steering Position Signal Calibration Not Learned
C0710:5A Steering Position Signal Not Plausible
C0710:71 Steering Position Signal Invalid Data

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0710 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0710 Chevrolet code?

Need more information on how to fix the C0710 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0710 Chevrolet code diagnosed by a professional: Find a repair shop in your area

Information for Specific Chevrolet Models

C0710 2014 Chevrolet Silverado — Steering Position Signal
C0710 2015 Chevrolet Silverado — Steering Position Signal
C0710 2016 Chevrolet Silverado — Steering Position Signal
C0710 2017 Chevrolet Silverado — Steering Position Signal
C0710 2018 Chevrolet Silverado — Steering Position Signal

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0710 Chevrolet Code

1. What are the common symptoms of OBDII code C0710 in a Chevrolet, related to the steering position signal?

- Common symptoms include steering wheel position sensor failure, stability control issues, and possible illumination of the ABS warning light.

2. What are the possible causes of OBDII code C0710 in a Chevrolet?

- The code C0710 is often triggered by a malfunction in the steering wheel position sensor, faulty wiring or connectors, or issues with the electronic stability control system.

3. How can I diagnose the OBDII code C0710 in my Chevrolet related to the steering position signal?

- A diagnostic scan tool can help retrieve the specific error code, allowing you to pinpoint the issue with the steering position sensor or related components.

4. Is it safe to drive my Chevrolet with OBDII code C0710 present?

- It is recommended to address the issue promptly, as driving with a faulty steering position sensor can affect the vehicle's stability control system and potentially compromise safety.

5. Can I repair OBDII code C0710 in my Chevrolet by myself?

- While it is possible to troubleshoot and repair some issues related to the steering position signal, complex repairs may require professional assistance to ensure proper diagnosis and resolution.

6. Are there any DIY tips for fixing OBDII code C0710 in a Chevrolet?

- DIY tips may include checking and cleaning the connectors, inspecting wiring for damage, and ensuring proper alignment of the steering wheel position sensor.

7. How much does it typically cost to repair OBDII code C0710 in a Chevrolet at a professional auto repair shop?

- The cost of repairing OBDII code C0710 can vary depending on the exact cause of the issue, but it may range from $200 to $500 including parts and labor.

8. Will resetting the OBDII system clear the C0710 code in my Chevrolet?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue with the steering position signal is not addressed, the code is likely to return.

9. Can a malfunctioning steering position signal affect other systems in my Chevrolet?

- Yes, a malfunctioning steering position signal can impact the vehicle's stability control system, ABS functionality, and overall handling characteristics.

10. How can I prevent OBDII code C0710 from occurring in my Chevrolet in the future?

- Regular maintenance, checking for loose connectors, and addressing any steering-related issues promptly can help prevent the recurrence of OBDII code C0710 related to the steering position signal.