C0710 2018 Chevrolet Silverado Code - Steering Position Signal
Quick Answer
The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0710 2018 Chevrolet Silverado indicates Steering Position Signal.
- Common causes
- Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0710 2018 Chevrolet Silverado Description
What are the Possible Causes of the DTC C0710 2018 Chevrolet Silverado?
- Steering Wheel Angle Sensor Centering (Calibration)
- Faulty Steering Wheel Angle Sensor
- Steering Wheel Angle Sensor harness is open or shorted
- Steering Wheel Angle Sensor circuit poor electrical connection
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0710 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.
C0710:09 Steering Position Signal Too Fast Transitions
C0710:0A Steering Position Signal Too Slow Transitions
C0710:11 Steering Position Signal High Input
C0710:18 Steering Position Signal Low Signal Amplitude
C0710:19 Steering Position Signal High Signal Amplitude
C0710:42 Steering Position Signal Calibration Not Programmed
C0710:4B Steering Position Signal Calibration Not Learned
C0710:5A Steering Position Signal Not Plausible
C0710:71 Steering Position Signal Invalid Data
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0710 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0710 2018 Chevrolet Silverado code?
Need more information on how to fix the C0710 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0710 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0710 2018 Chevrolet Silverado Code
1. What does the OBDII code C0710 mean on a 2018 Chevrolet Silverado?
C0710 indicates an issue with the steering position signal, often related to the Steering Wheel Position Sensor (SWPS) or its circuit.
2. What are the common symptoms of code C0710 on a Chevrolet Silverado?
Common symptoms include illumination of the ABS or traction control light, erratic steering assist, or loss of stability control functions.
3. What causes the C0710 code to appear on a 2018 Silverado?
The code can be triggered by a faulty steering wheel position sensor, damaged wiring or connectors, misalignment of the steering column, or an issue with the electronic control module.
4. Can a dirty or damaged steering column affect the C0710 code?
Yes, dirt, debris, or physical damage to the steering column can interfere with the steering wheel position sensor and cause this code.
5. How is the C0710 code diagnosed on a 2018 Silverado?
Technicians use a scan tool to check the steering angle signal, inspect the wiring and connectors, and verify proper alignment of the steering column.
6. Can misalignment of the steering wheel cause the C0710 code?
Yes, if the steering wheel is not properly aligned or if the sensor calibration is off, the code can be triggered.
7. Is it safe to drive a 2018 Silverado with the C0710 code?
Driving with this code can compromise stability control and traction systems, which may reduce safety in certain driving conditions.
8. How can I fix the C0710 code on my Chevrolet Silverado?
Repairs may include replacing the steering wheel position sensor, repairing damaged wiring, or recalibrating the sensor using a scan tool.
9. Does replacing the steering wheel position sensor always fix the C0710 code?
Not always. It’s important to inspect the wiring, connectors, and alignment before replacing the sensor to ensure the root cause is addressed.
10. How much does it cost to repair the C0710 code on a 2018 Silverado?
The cost depends on the root cause, but replacing a steering wheel position sensor typically ranges from $200 to $400, including parts and labor.
Discuss the causes and fixes for C0710 2018 Chevrolet Silverado OBDII Code
Code C0710 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
