AutoCodes – GMC – C0710 2015 GMC Sierra

C0710 2015 GMC Sierra Code - Steering Position Signal

Quick Answer

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0710 2015 GMC Sierra indicates Steering Position Signal.
Common causes: Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 328

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 17, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0710 2015 GMC Sierra Description

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). The Electronic Brake Control Module receives serial data inputs from the Steering Wheel Angle Sensor identifying the position and direction of the steering wheel rotation. The Electronic Brake Control Module utilizes this signal to calculate the driver's intended driving direction. The Diagnostic Trouble Code (DTC) will be set when the Steering Wheel Angle Sensor signal is invalid.

OBDII Code C0710 2015 GMC Sierra - Steering Position Signal - AutoCodes.com — C0710 2015 GMC Sierra Code - Steering Position Signal

What does this mean?

What are the Possible Causes of the DTC C0710 2015 GMC Sierra?

Steering Wheel Angle Sensor Centering (Calibration)
Faulty Steering Wheel Angle Sensor
Steering Wheel Angle Sensor harness is open or shorted
Steering Wheel Angle Sensor circuit poor electrical connection
Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0710 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Confirm that all tires are of the proper size and that all are matching brands. Check and adjust all tires to the stated cold air pressure as identified on the tire placard. If a miss sized or non-matching brand tire is present, inform the customer that in order for the vehicle stability enhanced system to function normally, tires need to be a uniform size and rolling diameter.

Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.

C0710:09 Steering Position Signal Too Fast Transitions
C0710:0A Steering Position Signal Too Slow Transitions
C0710:11 Steering Position Signal High Input
C0710:18 Steering Position Signal Low Signal Amplitude
C0710:19 Steering Position Signal High Signal Amplitude
C0710:42 Steering Position Signal Calibration Not Programmed
C0710:4B Steering Position Signal Calibration Not Learned
C0710:5A Steering Position Signal Not Plausible
C0710:71 Steering Position Signal Invalid Data

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0710 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0710 2015 GMC Sierra code?

Need more information on how to fix the C0710 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0710 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0710 2015 GMC Sierra Code

1. What are the common symptoms of OBDII code C0710 in a 2015 GMC Sierra related to the steering position signal?

- Common symptoms include the Service Stability/Traction Control warning light illuminating on the dashboard, issues with the electronic power steering system, and possible steering wheel misalignment.

2. What causes OBDII code C0710 to occur in a 2015 GMC Sierra?

- The code C0710 is typically triggered by a fault in the steering position sensor, improper sensor calibration, damaged wiring/connectors, or a malfunction within the electronic power steering system.

3. How can I diagnose the OBDII code C0710 in my 2015 GMC Sierra?

- Diagnosis involves using an OBDII scanner to retrieve the trouble code, checking the steering position sensor for proper operation, inspecting related wiring for damage, and ensuring the electronic power steering system is functioning correctly.

4. Can I continue driving my 2015 GMC Sierra with OBDII code C0710 present?

- It is not recommended to drive the vehicle with OBDII code C0710 active as it may affect the stability and control of the vehicle, especially in adverse driving conditions. It is best to address the issue promptly.

5. How can I clear OBDII code C0710 in my 2015 GMC Sierra?

- Clearing the code can be done using an OBDII scanner by accessing the vehicle's onboard computer and selecting the option to clear the diagnostic trouble codes. However, it is essential to fix the underlying issue to prevent the code from reappearing.

6. Is it possible to repair OBDII code C0710 in a 2015 GMC Sierra without professional help?

- While some basic checks like inspecting wiring connections can be done by DIY enthusiasts, resolving the root cause of the code may require advanced diagnostic tools and expertise. It is advisable to seek professional assistance for accurate diagnosis and repair.

7. Are there any safety concerns associated with OBDII code C0710 in a 2015 GMC Sierra?

- Yes, there are safety concerns as the code relates to the steering position signal, which is crucial for proper vehicle control and stability. Driving with this code present may compromise the steering response and overall safety of the vehicle.

8. Can a faulty steering position sensor trigger other warning lights in a 2015 GMC Sierra?

- Yes, a faulty steering position sensor leading to OBDII code C0710 can also trigger related warning lights such as ABS, traction control, and stability control lights due to the interconnected nature of these systems.

9. How much does it typically cost to repair OBDII code C0710 in a 2015 GMC Sierra?

- The cost of repairing OBDII code C0710 can vary depending on the exact cause of the issue. It may involve sensor replacement, wiring repairs, or recalibration of the steering system, with costs ranging from a few hundred to over a thousand dollars.

10. Will fixing OBDII code C0710 in a 2015 GMC Sierra improve the vehicle's overall driving experience?

- Yes, resolving OBDII code C0710 and restoring the proper function of the steering position signal will improve the vehicle's stability, handling, and overall driving experience by ensuring accurate steering input and control.