AutoCodes – GMC – C0710 2014 GMC Sierra

C0710 2014 GMC Sierra Code - Steering Position Signal

Quick Answer

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0710 2014 GMC Sierra indicates Steering Position Signal.
Common causes: Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 341

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 17, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0710 2014 GMC Sierra Description

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). The Electronic Brake Control Module receives serial data inputs from the Steering Wheel Angle Sensor identifying the position and direction of the steering wheel rotation. The Electronic Brake Control Module utilizes this signal to calculate the driver's intended driving direction. The Diagnostic Trouble Code (DTC) will be set when the Steering Wheel Angle Sensor signal is invalid.

OBDII Code C0710 2014 GMC Sierra - Steering Position Signal - AutoCodes.com — C0710 2014 GMC Sierra Code - Steering Position Signal

What does this mean?

What are the Possible Causes of the DTC C0710 2014 GMC Sierra?

Steering Wheel Angle Sensor Centering (Calibration)
Faulty Steering Wheel Angle Sensor
Steering Wheel Angle Sensor harness is open or shorted
Steering Wheel Angle Sensor circuit poor electrical connection
Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0710 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Confirm that all tires are of the proper size and that all are matching brands. Check and adjust all tires to the stated cold air pressure as identified on the tire placard. If a miss sized or non-matching brand tire is present, inform the customer that in order for the vehicle stability enhanced system to function normally, tires need to be a uniform size and rolling diameter.

Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.

C0710:09 Steering Position Signal Too Fast Transitions
C0710:0A Steering Position Signal Too Slow Transitions
C0710:11 Steering Position Signal High Input
C0710:18 Steering Position Signal Low Signal Amplitude
C0710:19 Steering Position Signal High Signal Amplitude
C0710:42 Steering Position Signal Calibration Not Programmed
C0710:4B Steering Position Signal Calibration Not Learned
C0710:5A Steering Position Signal Not Plausible
C0710:71 Steering Position Signal Invalid Data

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0710 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0710 2014 GMC Sierra code?

Need more information on how to fix the C0710 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0710 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0710 2014 GMC Sierra Code

1. What are the common symptoms of OBDII code C0710 in a 2014 GMC Sierra?

- Common symptoms include issues with the Electronic Power Steering (EPS) system, such as difficulty steering or the steering wheel feeling stiff or unresponsive.

2. What can cause the OBDII code C0710 to appear in a 2014 GMC Sierra?

- The code C0710 typically indicates a fault with the steering position signal, which may be caused by a malfunctioning steering position sensor or wiring issues.

3. How can I diagnose the steering position signal issue triggering code C0710 in my 2014 GMC Sierra?

- Diagnosing the issue may involve checking the wiring harness for any damage, testing the steering position sensor for proper operation, and inspecting the EPS system components for any faults.

4. Can I drive my 2014 GMC Sierra with OBDII code C0710 present?

- It is not recommended to drive the vehicle with the code C0710 present, as it can affect the proper functioning of the Electronic Power Steering system and compromise vehicle safety.

5. How can I repair OBDII code C0710 in my 2014 GMC Sierra?

- Repairing the code C0710 may involve replacing the faulty steering position sensor, repairing any damaged wiring, or recalibrating the EPS system to resolve the steering position signal issue.

6. Are there any DIY tips for addressing OBDII code C0710 in a 2014 GMC Sierra?

- While basic troubleshooting like checking the wiring connections for loose or damaged wires can be done by DIY enthusiasts, diagnosing and repairing the steering position signal issue may require professional expertise.

7. How much does it typically cost to fix OBDII code C0710 in a 2014 GMC Sierra?

- The cost of fixing code C0710 can vary depending on the root cause of the issue, the need for parts replacement, and labor costs. It's advisable to get a diagnosis from a qualified mechanic for an accurate estimate.

8. Is it safe to reset the OBDII code C0710 in my 2014 GMC Sierra without addressing the underlying issue?

- Resetting the code without addressing the underlying steering position signal problem may temporarily clear the warning light, but the issue will likely resurface, potentially leading to unsafe driving conditions.

9. Can extreme weather conditions cause OBDII code C0710 to trigger in a 2014 GMC Sierra?

- Extreme weather conditions like excessive heat or moisture can sometimes impact the EPS system and trigger code C0710. Ensuring proper maintenance and protection of the vehicle can help prevent such issues.

10. Will OBDII code C0710 in a 2014 GMC Sierra affect the vehicle's overall performance?

- The presence of code C0710 can impact the performance of the Electronic Power Steering system, leading to steering difficulties and affecting the overall driving experience. Addressing the issue promptly is crucial.