AutoCodes – GMC – C0558 2014 GMC Sierra

C0558 2014 GMC Sierra Code - Calibration Data Configuration Not Programmed

Quick Answer

The Electronic Brake Control Module (EBCM) receives serial data messages from other modules. Common causes include Faulty Electronic Brake Control Module (EBCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0558 2014 GMC Sierra indicates Calibration Data Configuration Not Programmed.
Common causes: Common causes include Faulty Electronic Brake Control Module (EBCM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 347

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 14, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0558 2014 GMC Sierra Description

The Electronic Brake Control Module (EBCM) receives serial data messages from other modules. The Electronic Brake Control Module must be configured with the Vehicle Identification Number (VIN), configuration data, and vehicle options. If not correctly configured after installation, the Electronic Brake Control Module may set this Diagnostic Trouble Code (DTC). The internal fault detection is handled inside the control module. No external circuits are involved. The DTC will be set when the Electronic Brake Control Module is not programmed.

OBDII Code C0558 2014 GMC Sierra - Calibration Data Configuration Not Programmed - AutoCodes.com — C0558 2014 GMC Sierra Code - Calibration Data Configuration Not Programmed

What does this mean?

What are the Possible Causes of the DTC C0558 2014 GMC Sierra?

Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0558 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0558 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0558 2014 GMC Sierra code?

Need more information on how to fix the C0558 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0558 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0558 2014 GMC Sierra Code

1. What does the OBDII code C0558 on a 2014 GMC Sierra mean?

The code C0558 indicates that the Calibration Data Configuration is not programmed in the electronic control module (ECM) of the vehicle.

2. What are the common symptoms of OBDII code C0558 in a 2014 GMC Sierra?

Common symptoms of code C0558 include issues with the vehicle's transmission performance, such as rough shifting, hesitation, or slipping.

3. What are the possible causes of the Calibration Data Configuration Not Programmed code in a 2014 GMC Sierra?

Possible causes of code C0558 include a faulty electronic control module (ECM), damaged wiring or connectors, or a software glitch in the vehicle's system.

4. How can I diagnose OBDII code C0558 in my 2014 GMC Sierra?

Diagnosing code C0558 typically involves using an OBDII scanner to read the code, checking for any other related codes, and inspecting the ECM, wiring, and connectors for any visible damage.

5. What are the repair options for OBDII code C0558 in a 2014 GMC Sierra?

Repair options for code C0558 may include reprogramming the ECM with the correct calibration data, repairing or replacing damaged wiring or connectors, or replacing the ECM if necessary.

6. Can I drive my 2014 GMC Sierra with OBDII code C0558?

It is not recommended to drive your vehicle with an active OBDII code, as it can lead to potential transmission issues and further damage if left unresolved.

7. How much does it cost to repair OBDII code C0558 on a 2014 GMC Sierra?

The cost of repairing OBDII code C0558 can vary depending on the underlying cause, but it may involve reprogramming the ECM, repairing wiring, or replacing the ECM, which can range from a few hundred to a few thousand dollars.

8. Can I reset OBDII code C0558 on my 2014 GMC Sierra with a simple reset tool?

While you can clear the code with an OBDII scanner, it is important to diagnose and address the root cause of the issue to prevent the code from reoccurring.

9. Is OBDII code C0558 a common issue in 2014 GMC Sierra vehicles?

Code C0558 is not a common issue in 2014 GMC Sierra vehicles, but it can occur due to various factors such as ECM malfunctions, wiring problems, or software issues.

10. How can I prevent OBDII code C0558 from appearing in my 2014 GMC Sierra?

Regular maintenance, such as checking for software updates, ensuring proper wiring connections, and addressing any ECM issues promptly, can help prevent code C0558 from appearing in your 2014 GMC Sierra.