C0544 2017 GMC Sierra Code - Steering Wheel Angle Sensor Signal Not Plausible
Quick Answer
The Power Steering Control Module continuously monitors the steering wheel angle rationality data received from the Electronic Brake Control Module (EBCM). Common causes include Steering Wheel Angle Sensor Reset (Relearn), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0544 2017 GMC Sierra indicates Steering Wheel Angle Sensor Signal Not Plausible.
- Common causes
- Common causes include Steering Wheel Angle Sensor Reset (Relearn), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0544 2017 GMC Sierra Description
What are the Possible Causes of the DTC C0544 2017 GMC Sierra?
- Steering Wheel Angle Sensor Reset (Relearn)
- Faulty Steering Wheel Angle Sensor
- Steering Wheel Angle Sensor harness is open or shorted
- Steering Wheel Angle Sensor circuit poor electrical connection
How to Fix the DTC C0544 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0544 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0544 2017 GMC Sierra code?
Need more information on how to fix the C0544 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0544 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0544 2017 GMC Sierra Code
1. What are the common symptoms of OBDII code C0544 in a 2017 GMC Sierra?
- Common symptoms include the ABS warning light being illuminated on the dashboard and potential issues with the stability control system.
2. What does the OBDII code C0544 "Steering Wheel Angle Sensor Signal Not Plausible" mean for a 2017 GMC Sierra?
- This code indicates that the signal from the steering wheel angle sensor is not within the expected parameters, which can affect the proper functioning of the vehicle's stability control system.
3. What are the possible causes of OBDII code C0544 in a 2017 GMC Sierra?
- Potential causes include a faulty steering wheel angle sensor, damaged wiring or connectors related to the sensor, or issues with the stability control module.
4. How serious is OBDII code C0544 in a 2017 GMC Sierra?
- While the vehicle may still be drivable with this code present, it is important to address it promptly to ensure the proper operation of the stability control system, especially in adverse driving conditions.
5. Can I continue driving my 2017 GMC Sierra with OBDII code C0544?
- It is recommended to have the issue diagnosed and repaired as soon as possible to prevent potential safety hazards and further damage to the vehicle's systems.
6. How can I diagnose the cause of OBDII code C0544 in my 2017 GMC Sierra?
- Diagnosing the issue typically involves using a professional OBDII scanner to read the code, inspecting the steering wheel angle sensor and related components, and checking for any visible signs of damage.
7. Is it possible to reset OBDII code C0544 in a 2017 GMC Sierra without fixing the underlying issue?
- While you can clear the code temporarily, it is not recommended as the issue will likely reoccur if the root cause is not addressed.
8. Can I repair OBDII code C0544 in my 2017 GMC Sierra myself?
- Depending on your automotive repair skills and access to tools, you may be able to address this issue yourself by replacing the faulty components or repairing damaged wiring. However, professional assistance is recommended for accurate diagnosis and proper repair.
9. How much does it typically cost to repair OBDII code C0544 in a 2017 GMC Sierra?
- The repair cost can vary depending on the specific cause of the issue, but it may involve replacing the steering wheel angle sensor, repairing wiring, or addressing issues with the stability control module. Costs can range from a few hundred to over a thousand dollars, including parts and labor.
10. Are there any preventative measures to avoid OBDII code C0544 in a 2017 GMC Sierra?
- Regular maintenance and inspections of the vehicle's systems, including the steering wheel angle sensor and related components, can help prevent issues that may trigger this code.
Discuss the causes and fixes for C0544 2017 GMC Sierra OBDII Code
Code C0544 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
