C0544 2014 GMC Sierra Code - Steering Wheel Angle Sensor Signal Not Plausible
Quick Answer
The Power Steering Control Module continuously monitors the steering wheel angle rationality data received from the Electronic Brake Control Module (EBCM). Common causes include Steering Wheel Angle Sensor Reset (Relearn), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0544 2014 GMC Sierra indicates Steering Wheel Angle Sensor Signal Not Plausible.
- Common causes
- Common causes include Steering Wheel Angle Sensor Reset (Relearn), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0544 2014 GMC Sierra Description
What are the Possible Causes of the DTC C0544 2014 GMC Sierra?
- Steering Wheel Angle Sensor Reset (Relearn)
- Faulty Steering Wheel Angle Sensor
- Steering Wheel Angle Sensor harness is open or shorted
- Steering Wheel Angle Sensor circuit poor electrical connection
How to Fix the DTC C0544 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0544 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0544 2014 GMC Sierra code?
Need more information on how to fix the C0544 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0544 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0544 2014 GMC Sierra Code
1. What are the common symptoms of OBDII code C0544 in a 2014 GMC Sierra?
The common symptoms include the traction control system being disabled, the stability control system not functioning properly, and the dashboard displaying a warning light related to the steering wheel angle sensor.
2. What could cause the Steering Wheel Angle Sensor Signal Not Plausible code (C0544) in a 2014 GMC Sierra?
Possible causes for this code may include a faulty steering wheel angle sensor, damaged wiring or connectors related to the sensor, or issues with the electronic control module.
3. How serious is the OBDII code C0544 in a 2014 GMC Sierra?
This code is considered moderately serious as it affects the proper functioning of important safety systems like traction and stability control. It is recommended to address this issue promptly to ensure safe driving conditions.
4. Can the Steering Wheel Angle Sensor Signal Not Plausible code (C0544) be cleared and reset in a 2014 GMC Sierra?
Yes, the code can be cleared and reset using an OBDII scanner or by disconnecting the vehicle's battery for a short period. However, if the underlying issue is not fixed, the code is likely to reappear.
5. How can I diagnose and repair OBDII code C0544 in my 2014 GMC Sierra?
Diagnosing this code may require using a scan tool to read the specific data related to the steering wheel angle sensor. Repairing the issue may involve replacing the faulty sensor, checking and repairing any damaged wiring or connectors, or reprogramming the electronic control module.
6. Is it safe to drive my 2014 GMC Sierra with the Steering Wheel Angle Sensor Signal Not Plausible code (C0544) present?
It is generally not recommended to drive the vehicle with this code active, as it may affect the proper operation of critical safety systems. It is advised to address the issue as soon as possible.
7. Can a DIY enthusiast fix the OBDII code C0544 in a 2014 GMC Sierra?
Depending on the DIY skills and experience level, some enthusiasts may be able to diagnose and repair this code themselves. However, dealing with electronic components and sensors may require specific tools and knowledge.
8. How much does it typically cost to repair OBDII code C0544 in a 2014 GMC Sierra at a professional auto repair shop?
The cost of repairing this code can vary depending on the underlying issue and the labor rates of the auto repair shop. It may involve replacing the sensor, repairing wiring, or reprogramming the module, which can range from a few hundred to over a thousand dollars.
9. Will OBDII code C0544 cause my 2014 GMC Sierra to fail an emissions test?
This code is not directly related to emissions, so it may not cause your vehicle to fail an emissions test. However, it is still important to address the issue for safety and performance reasons.
10. How can I prevent OBDII code C0544 from occurring in my 2014 GMC Sierra in the future?
To prevent this code from happening again, it's essential to ensure regular maintenance of your vehicle's steering components, avoid rough handling of the steering wheel, and address any warning lights or issues promptly to prevent further damage.
Discuss the causes and fixes for C0544 2014 GMC Sierra OBDII Code
Code C0544 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
