C0543 2018 GMC Sierra Code - Brake Pressure Sensor 2 Circuit High
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0543 2018 GMC Sierra indicates Brake Pressure Sensor 2 Circuit High.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0543 2018 GMC Sierra Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C0543 2018 GMC Sierra?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C0543 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0543 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0543 2018 GMC Sierra code?
Need more information on how to fix the C0543 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0543 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0543 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code C0543 in a 2018 GMC Sierra?
The common symptoms of OBDII code C0543 include the illumination of the check engine light, issues with the vehicle's braking system, and potential loss of brake pressure.
2. What does the OBDII code C0543 Brake Pressure Sensor 2 Circuit High mean for a 2018 GMC Sierra?
The code C0543 indicates a high circuit voltage in Brake Pressure Sensor 2, suggesting a potential issue with the brake pressure sensor's circuit.
3. What are the possible causes of OBDII code C0543 in a 2018 GMC Sierra?
Possible causes of code C0543 include a faulty brake pressure sensor, damaged wiring or connectors in the sensor circuit, or issues with the brake control module.
4. How can I diagnose the OBDII code C0543 in my 2018 GMC Sierra?
Diagnosing code C0543 involves using a diagnostic scanner to retrieve the code, inspecting the brake pressure sensor and its wiring, and testing the sensor's voltage to determine the cause of the high circuit reading.
5. Can I continue driving my 2018 GMC Sierra with OBDII code C0543?
It is not recommended to drive your vehicle with code C0543, as it can affect the proper functioning of the braking system. It is advised to address the issue promptly to ensure safety.
6. Is it possible to repair OBDII code C0543 in a 2018 GMC Sierra on my own?
While some DIY enthusiasts may attempt to diagnose and repair code C0543, it is recommended to consult a professional mechanic with experience in handling brake system issues for an accurate diagnosis and proper repair.
7. How much does it cost to repair OBDII code C0543 in a 2018 GMC Sierra?
The cost of repairing code C0543 can vary depending on the underlying cause of the issue, parts needed for replacement, and labor costs. It is advisable to obtain quotes from different repair shops for an accurate estimate.
8. Can a faulty brake pressure sensor cause code C0543 in a 2018 GMC Sierra?
Yes, a faulty brake pressure sensor is one of the common causes of code C0543, as it can lead to abnormal readings in the sensor circuit, triggering the high voltage code.
9. Will resetting the OBDII code C0543 in my 2018 GMC Sierra make it go away permanently?
Simply resetting the code without addressing the underlying issue will not make it go away permanently. The root cause of code C0543 needs to be identified and repaired to prevent the code from reoccurring.
10. How urgent is it to address OBDII code C0543 in a 2018 GMC Sierra?
Addressing code C0543 promptly is crucial, as it indicates a potential issue with the brake pressure sensor circuit, which can impact the vehicle's braking performance and overall safety. It is advisable to address this issue as soon as possible.
Discuss the causes and fixes for C0543 2018 GMC Sierra OBDII Code
Code C0543 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
