C0513 Dodge Code - Wheel Speed Signal Right Rear Rationality
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Wheel Speed Signal Right Rear Sensor. Common causes include Faulty Wheel Speed Signal Right Rear Sensor, Wheel Speed Signal Right Rear Sensor harness is open or shorted, Wheel Speed Signal Right Rear Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0513 Dodge indicates Wheel Speed Signal Right Rear Rationality.
- Common causes
- Common causes include Faulty Wheel Speed Signal Right Rear Sensor, Wheel Speed Signal Right Rear Sensor harness is open or shorted, Wheel Speed Signal Right Rear Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0513 Dodge Description
What are the Possible Causes of the DTC C0513 Dodge?
- Faulty Wheel Speed Signal Right Rear Sensor
- Wheel Speed Signal Right Rear Sensor harness is open or shorted
- Wheel Speed Signal Right Rear Sensor circuit poor electrical connection
How to Fix the DTC C0513 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0513 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0513 Dodge code?
Need more information on how to fix the C0513 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0513 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0513 Dodge Code
1. What does OBDII code C0513 mean on a Dodge vehicle?
Code C0513 indicates a "Wheel Speed Signal Right Rear Rationality" issue, meaning the ABS module has detected an inconsistency or fault with the right rear wheel speed sensor signal.
2. What are the common symptoms of code C0513?
Symptoms may include the ABS warning light or traction control light illuminating, erratic ABS or traction control function, or no noticeable symptoms in some cases.
3. What causes code C0513 on a Dodge?
Common causes include a faulty right rear wheel speed sensor, damaged wiring or connectors, a dirty or damaged tone ring, or issues with the ABS module.
4. Can a dirty tone ring cause code C0513?
Yes, a dirty or damaged tone ring can disrupt the wheel speed sensor's ability to read wheel speed accurately, leading to this code.
5. How do I diagnose code C0513 on a Dodge?
Start by visually inspecting the right rear wheel speed sensor, its wiring, and the tone ring for damage or debris. Use a scan tool to check live wheel speed sensor data and confirm the issue.
6. Can I still drive with code C0513 active?
While the vehicle may still be drivable, ABS and traction control systems may not function properly, increasing the risk of losing control during certain driving conditions.
7. How do I fix code C0513 on a Dodge?
Potential repairs include replacing the right rear wheel speed sensor, repairing damaged wiring or connectors, cleaning or replacing the tone ring, or reprogramming the ABS module if necessary.
8. How much does it cost to repair code C0513?
The cost depends on the specific issue but typically ranges from $100 to $300 for parts and labor, with wheel speed sensor replacement being the most common repair.
9. Can a low battery or electrical issue trigger code C0513?
Yes, a weak battery or electrical fault can cause intermittent sensor signals, potentially triggering this code.
10. Do I need to clear the code after repairs?
Yes, after completing repairs, use a scan tool to clear the code and verify that it does not return during a test drive.
Discuss the causes and fixes for C0513 Dodge OBDII Code
Code C0513 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
