C0475 2014 GMC Sierra Code - Electric Steering Motor Circuit
Quick Answer
The Power Steering Control Module continuously monitors the voltage and current levels being commanded to the 3-phase Electric Power Steering Motor. Common causes include Faulty Electric Power Steering Motor, Electric Power Steering Motor harness is open or shorted, Electric Power Steering Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0475 2014 GMC Sierra indicates Electric Steering Motor Circuit.
- Common causes
- Common causes include Faulty Electric Power Steering Motor, Electric Power Steering Motor harness is open or shorted, Electric Power Steering Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0475 2014 GMC Sierra Description
What are the Possible Causes of the DTC C0475 2014 GMC Sierra?
- Faulty Electric Power Steering Motor
- Electric Power Steering Motor harness is open or shorted
- Electric Power Steering Motor circuit poor electrical connection
- Faulty Power Steering Control Module
How to Fix the DTC C0475 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
C0475:59 Electric Steering Motor Circuit Slip Detected
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0475 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0475 2014 GMC Sierra code?
Need more information on how to fix the C0475 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0475 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0475 2014 GMC Sierra Code
1. What does the OBDII code C0475 mean on a 2014 GMC Sierra?
C0475 indicates an issue with the electric steering motor circuit, suggesting a problem with the power or communication to the steering motor.
2. What are the common symptoms of the C0475 code on a GMC Sierra?
Symptoms may include a loss of power steering assist, difficulty turning the steering wheel, or a warning light on the dashboard.
3. What causes the C0475 code to trigger in a 2014 GMC Sierra?
Common causes include a faulty steering motor, damaged wiring or connectors, a blown fuse, or a malfunctioning power steering control module.
4. Can I still drive my 2014 GMC Sierra with the C0475 code?
Driving may be possible, but steering will likely be more difficult, especially at lower speeds. It’s recommended to address the issue promptly for safety.
5. How do I diagnose the cause of the C0475 code?
Start by inspecting the wiring and connectors to the steering motor for damage or corrosion. Use a scan tool to check for additional codes, and test the steering motor and related circuits.
6. Is the C0475 code specific to the 2014 GMC Sierra?
No, this code can appear in other vehicles with electric power steering, but the diagnosis and repair steps may vary by make and model.
7. How much does it cost to fix the C0475 code on a 2014 GMC Sierra?
Repair costs can range from $100 for simple wiring repairs to over $1,000 if the steering motor or control module needs replacement.
8. Can a weak battery cause the C0475 code?
Yes, a weak or failing battery can cause voltage issues that may trigger this code. Ensure the battery and charging system are in good condition.
9. Do I need to reprogram the power steering control module after repairs for the C0475 code?
In some cases, reprogramming or resetting the control module may be required after replacing components. Refer to the manufacturer’s guidelines.
10. Will clearing the C0475 code fix the problem?
Clearing the code may temporarily turn off the warning light, but the underlying issue will persist until properly repaired.
Discuss the causes and fixes for C0475 2014 GMC Sierra OBDII Code
Code C0475 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
