AutoCodes – GMC – C0381 2016 GMC Sierra

C0381 2016 GMC Sierra Code - Range Actuator System Performance High Temperature

Quick Answer

The Transfer Case Motor, also known as the transfer case range actuator, is a bi-directional, permanent magnet, DC motor. Common causes include Faulty Transfer Case Motor (Transfer Case Two/Four Wheel Drive Actuator), Transfer Case Motor harness is open or shorted, Transfer Case Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0381 2016 GMC Sierra indicates Range Actuator System Performance High Temperature.
Common causes: Common causes include Faulty Transfer Case Motor (Transfer Case Two/Four Wheel Drive Actuator), Transfer Case Motor harness is open or shorted, Transfer Case Motor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 146

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 05, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0381 2016 GMC Sierra Description

The Transfer Case Motor, also known as the transfer case range actuator, is a bi-directional, permanent magnet, DC motor. When energized, through the transfer case clockwise circuit or transfer case counterclockwise circuit, the ground is provided by the opposing motor control circuit which becomes grounded through the transfer case control module ground circuit. The transfer case range actuator, through a series of gears, rotates the transfer case control actuator shaft which moves the transfer case two/four-wheel drive actuator cam and transfer case high/low shift fork in order to shift the transfer case between the following modes or ranges: 2WD, 4WD/AWD Automatic, 4WD High/Locked, 4WD Low and Neutral.

OBDII Code C0381 2016 GMC Sierra - Range Actuator System Performance High Temperature - AutoCodes.com — C0381 2016 GMC Sierra Code - Range Actuator System Performance High Temperature

What does this mean?

What are the Possible Causes of the DTC C0381 2016 GMC Sierra?

Faulty Transfer Case Motor (Transfer Case Two/Four Wheel Drive Actuator)
Transfer Case Motor harness is open or shorted
Transfer Case Motor circuit poor electrical connection
Faulty Transfer Case Control Module

How to Fix the DTC C0381 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0381 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0381 2016 GMC Sierra code?

Need more information on how to fix the C0381 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0381 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0381 2016 GMC Sierra Code

1. What are the common symptoms of OBDII code C0381 in a 2016 GMC Sierra?

- Common symptoms include poor fuel economy, rough idling, reduced engine performance, and potential overheating issues.

2. What causes the Range Actuator System Performance High Temperature code (C0381) in a 2016 GMC Sierra?

- This code is often triggered by a faulty temperature sensor, wiring issues, or problems with the range actuator itself.

3. How serious is the C0381 code in a 2016 GMC Sierra?

- Ignoring this code can lead to further damage to the engine and transmission components, so it is important to address it promptly.

4. Can I continue driving my 2016 GMC Sierra with the C0381 code present?

- It is not recommended to continue driving with this code active, as it can affect the vehicle's performance and potentially lead to costly repairs.

5. How can I diagnose the C0381 code in my 2016 GMC Sierra?

- A professional diagnostic scan tool will be needed to retrieve the specific error codes and pinpoint the exact cause of the issue.

6. What are some repair tips for fixing the Range Actuator System Performance High Temperature code in a 2016 GMC Sierra?

- Inspect and replace any damaged wiring, test and replace the temperature sensor if necessary, and check the range actuator for proper functioning.

7. Is it possible to reset the C0381 code in a 2016 GMC Sierra without fixing the underlying issue?

- Resetting the code without addressing the root cause will only temporarily clear the warning light, and the issue is likely to reoccur.

8. How much does it typically cost to repair the C0381 code in a 2016 GMC Sierra?

- The cost of repair can vary depending on the exact cause of the issue, but it may involve replacing sensors, repairing wiring, or addressing actuator problems.

9. Can a DIY enthusiast fix the C0381 code in a 2016 GMC Sierra?

- While some experienced DIYers may be able to tackle the repairs associated with this code, it is recommended to seek professional help for accurate diagnosis and repair.

10. How can I prevent the C0381 code from appearing in my 2016 GMC Sierra in the future?

- Regular maintenance, including checking sensor connections, monitoring engine temperature, and addressing any warning signs promptly, can help prevent the reoccurrence of this code.