AutoCodes – Oldsmobile – C0300 Oldsmobile

C0300 Oldsmobile Code - Rear Propshaft Speed Sensor

Quick Answer

The rear propshaft speed sensor is a Permanent Magnet (PM) generator. Common causes include Faulty Rear Propshaft Speed Sensor, Rear Propshaft Speed Sensor harness is open or shorted, Rear Propshaft Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0300 Oldsmobile indicates Rear Propshaft Speed Sensor.
Common causes: Common causes include Faulty Rear Propshaft Speed Sensor, Rear Propshaft Speed Sensor harness is open or shorted, Rear Propshaft Speed Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,723

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 18, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0300 Oldsmobile Description

The rear propshaft speed sensor is a Permanent Magnet (PM) generator. The PM generator produces a pulsing AC voltage. The AC voltage level and number of pulses increases as speed increases. The module converts the pulsating AC voltage to a propshaft RPM which is used for calculations. The propshaft RPM can be displayed with a scan tool.
This DTC detects an open, short to ground, short to voltage or faulty sensor.

OBDII Code C0300 Oldsmobile - Rear Propshaft Speed Sensor - AutoCodes.com — C0300 Oldsmobile Code - Rear Propshaft Speed Sensor

What does this mean?

What are the Possible Causes of the DTC C0300 Oldsmobile?

Faulty Rear Propshaft Speed Sensor
Rear Propshaft Speed Sensor harness is open or shorted
Rear Propshaft Speed Sensor circuit poor electrical connection

How to Fix the DTC C0300 Oldsmobile?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

There is factory service bulletin for the C0300 code. The factory recommends reprogramming the Transfer Case Control Module (TCCOM) to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0300 Oldsmobile code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0300 Oldsmobile code?

Need more information on how to fix the C0300 Oldsmobile code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0300 Oldsmobile code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0300 Oldsmobile Code

1. What are common symptoms of OBDII code C0300 in an Oldsmobile related to the rear propshaft speed sensor?

- Common symptoms include erratic speedometer readings, ABS warning light illumination, and issues with the vehicle's stability control system.

2. What can cause the OBDII code C0300 in an Oldsmobile?

- The code C0300 in an Oldsmobile is often caused by a faulty rear propshaft speed sensor, damaged wiring, or a malfunctioning sensor connector.

3. How can I diagnose the issue triggering OBDII code C0300 in my Oldsmobile?

- Diagnosis typically involves checking the rear propshaft speed sensor for damage, inspecting the wiring for any breaks or shorts, and using a diagnostic scanner to read the code and sensor data.

4. Can I continue driving my Oldsmobile with OBDII code C0300 present?

- It is not recommended to drive the vehicle with the code C0300 present, as it can affect the vehicle's stability control system and may lead to unsafe driving conditions.

5. How do I repair OBDII code C0300 in my Oldsmobile?

- Repairing the code C0300 usually involves replacing the rear propshaft speed sensor, repairing any damaged wiring, and clearing the code with a diagnostic scanner.

6. Are there any tips for preventing OBDII code C0300 in my Oldsmobile?

- To prevent code C0300, it's essential to perform regular maintenance on the vehicle, including checking the condition of sensors and wiring during routine inspections.

7. Can a DIY enthusiast fix OBDII code C0300 in an Oldsmobile?

- Depending on their skill level, a DIY enthusiast may be able to replace the rear propshaft speed sensor and address wiring issues causing code C0300, but it's recommended to seek professional help for accurate diagnosis.

8. How much does it typically cost to repair OBDII code C0300 in an Oldsmobile?

- The cost of repairing code C0300 can vary depending on the extent of the damage and whether professional services are required, but it may range from $100 to $300 for parts and labor.

9. Is OBDII code C0300 in an Oldsmobile a common issue?

- OBDII code C0300 related to the rear propshaft speed sensor is a relatively common issue in Oldsmobile vehicles, particularly in models with aging sensors or wiring.

10. Will resetting the OBDII code C0300 in my Oldsmobile make it disappear permanently?

- Resetting the code may temporarily clear the warning light, but if the underlying issue causing code C0300 is not addressed, the code is likely to reappear.