C0277 2014 GMC Sierra Code - Brake Pedal Position Sensor Circuit
Quick Answer
The brake pedal position sensor is used to sense the action of the driver's application of the brake pedal. Common causes include Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted, Brake Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0277 2014 GMC Sierra indicates Brake Pedal Position Sensor Circuit.
- Common causes
- Common causes include Faulty Brake Pedal Position Sensor, Brake Pedal Position Sensor harness is open or shorted, Brake Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0277 2014 GMC Sierra Description
What are the Possible Causes of the DTC C0277 2014 GMC Sierra?
- Faulty Brake Pedal Position Sensor
- Brake Pedal Position Sensor harness is open or shorted
- Brake Pedal Position Sensor circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC C0277 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
C0277:07 Brake Pedal Position Sensor Circuit High Voltage
C0277:09 Brake Pedal Position Sensor Circuit Too Fast Transitions
C0277:12 Brake Pedal Position Sensor Circuit Below Minimum Threshold
C0277:4B Brake Pedal Position Sensor Circuit Calibration Not Learned
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0277 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0277 2014 GMC Sierra code?
Need more information on how to fix the C0277 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0277 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0277 2014 GMC Sierra Code
What does the OBDII code C0277 mean on a 2014 GMC Sierra?
Code C0277 indicates an issue with the Brake Pedal Position Sensor Circuit, which monitors the position of the brake pedal for the vehicle's braking and stability systems.
What are the common symptoms of code C0277 in a 2014 GMC Sierra?
Symptoms may include the ABS or traction control warning light activating, erratic braking performance, or reduced functionality of stability control systems.
What causes code C0277 to appear in a 2014 GMC Sierra?
Common causes include a faulty brake pedal position sensor, damaged wiring or connectors in the sensor circuit, or issues with the vehicle’s electronic control module (ECM).
How is the brake pedal position sensor related to braking performance?
The sensor provides critical data to the vehicle’s control systems, helping to regulate ABS, traction control, and stability features based on brake pedal input.
Can code C0277 affect the safety of my 2014 GMC Sierra?
Yes, it can compromise the effectiveness of ABS and stability control systems, potentially reducing the vehicle’s ability to maintain traction and stability under certain conditions.
How do I diagnose code C0277 in a 2014 GMC Sierra?
Diagnosis typically involves scanning for stored codes, visually inspecting the brake pedal position sensor and its wiring, and testing the sensor with a multimeter for proper operation.
Can I drive my 2014 GMC Sierra with code C0277 active?
While the vehicle may still be drivable, it’s not recommended due to potential issues with braking and stability control systems that could impact safety.
How do I fix code C0277 on a 2014 GMC Sierra?
Repairs may include replacing the brake pedal position sensor, repairing damaged wiring or connectors, or reprogramming the ECM if necessary.
How much does it cost to fix code C0277 on a 2014 GMC Sierra?
Repair costs can range from $100 to $300, depending on whether the sensor needs replacement or if there are wiring issues that require additional labor.
Can a faulty brake pedal position sensor cause other codes to appear?
Yes, issues with the sensor can trigger related codes for ABS, traction control, or stability control systems, as these rely on accurate brake pedal position data.
Discuss the causes and fixes for C0277 2014 GMC Sierra OBDII Code
Code C0277 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
