C0252 Buick Code - Vehicle Stability Control Module Sensors Correlation Malfunction
Quick Answer
The Yaw Rate, Lateral Acceleration, and Longitudinal Acceleration Sensors are combined into one Multi-axis Acceleration Sensor. Common causes include Yaw Sensor Learn and Steering Wheel Angle Sensor Centering, Faulty Steering Wheel Angle Sensor, Faulty Airbag Sensing and Diagnostic Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0252 Buick indicates Vehicle Stability Control Module Sensors Correlation Malfunction.
- Common causes
- Common causes include Yaw Sensor Learn and Steering Wheel Angle Sensor Centering, Faulty Steering Wheel Angle Sensor, Faulty Airbag Sensing and Diagnostic Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0252 Buick Description
What are the Possible Causes of the DTC C0252 Buick?
- Yaw Sensor Learn and Steering Wheel Angle Sensor Centering
- Faulty Steering Wheel Angle Sensor
- Faulty Airbag Sensing and Diagnostic Module
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0252 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0252 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0252 Buick code?
Need more information on how to fix the C0252 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0252 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0252 Buick Code
1. What does the OBDII code C0252 mean on a Buick?
The code C0252 indicates a "Vehicle Stability Control Module Sensors Correlation Malfunction," meaning the control module has detected an issue with the correlation or communication between stability control sensors.
2. What are the common symptoms of a C0252 code on a Buick?
Common symptoms include the illumination of the ABS or stability control warning light, reduced traction or stability control performance, and occasional loss of vehicle stability assistance.
3. What causes a C0252 code to appear on a Buick?
Causes may include faulty wheel speed sensors, a malfunctioning stability control module, damaged wiring or connectors, or calibration issues between the sensors.
4. Can I drive my Buick with a C0252 code?
While the vehicle may still be drivable, stability and traction control systems may not function properly, increasing the risk of losing control in slippery or emergency situations.
5. How can I fix a C0252 code on a Buick?
Repairs may involve inspecting and replacing faulty sensors, repairing damaged wiring, recalibrating the stability control system, or replacing the control module if needed.
6. How do I diagnose a C0252 code on my Buick?
Start by using a diagnostic scanner to confirm the code, then inspect the wheel speed sensors, wiring, and connectors for damage. Perform a stability control system calibration if no physical issues are found.
7. Is a C0252 code related to the ABS system on a Buick?
Yes, the C0252 code is directly related to the ABS and traction control systems, as these systems rely on sensor data to maintain vehicle stability.
8. How much does it cost to fix a C0252 code on a Buick?
The cost depends on the specific issue, ranging from $50–$200 for a sensor replacement to $500 or more for control module repairs or replacements.
9. Can a weak battery cause a C0252 code on my Buick?
Yes, a weak or failing battery can cause voltage issues that affect the stability control module and result in a C0252 code.
10. Do I need to recalibrate sensors after fixing a C0252 code on a Buick?
Yes, recalibrating the sensors and the stability control system is often necessary after repairs to ensure proper operation and to clear the code.
Discuss the causes and fixes for C0252 Buick OBDII Code
Code C0252 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
