C0252 2016 GMC Sierra Code - Vehicle Stability Control Module Sensors Correlation Malfunction
Quick Answer
The Yaw Rate, Lateral Acceleration, and Longitudinal Acceleration Sensors are combined into one Multi-axis Acceleration Sensor. Common causes include Yaw Sensor Learn and Steering Wheel Angle Sensor Centering, Faulty Steering Wheel Angle Sensor, Faulty Airbag Sensing and Diagnostic Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0252 2016 GMC Sierra indicates Vehicle Stability Control Module Sensors Correlation Malfunction.
- Common causes
- Common causes include Yaw Sensor Learn and Steering Wheel Angle Sensor Centering, Faulty Steering Wheel Angle Sensor, Faulty Airbag Sensing and Diagnostic Module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0252 2016 GMC Sierra Description
What are the Possible Causes of the DTC C0252 2016 GMC Sierra?
- Yaw Sensor Learn and Steering Wheel Angle Sensor Centering
- Faulty Steering Wheel Angle Sensor
- Faulty Airbag Sensing and Diagnostic Module
- Faulty Electronic Brake Control Module (EBCM)
How to Fix the DTC C0252 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0252 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0252 2016 GMC Sierra code?
Need more information on how to fix the C0252 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0252 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0252 2016 GMC Sierra Code
What does the OBDII code C0252 mean on a 2016 GMC Sierra?
C0252 indicates a Vehicle Stability Control Module Sensors Correlation Malfunction, meaning the stability control system has detected a discrepancy between sensor signals.
What are the common symptoms of code C0252 on a 2016 GMC Sierra?
Common symptoms include the stability control or traction control warning light being illuminated, reduced vehicle stability, and possible intermittent ABS activation.
What causes code C0252 to be triggered?
C0252 can be caused by faulty wheel speed sensors, a malfunctioning stability control module, wiring issues, or miscalibrated steering angle sensors.
Can driving with code C0252 cause further damage to my GMC Sierra?
While the vehicle may remain drivable, the stability control and traction control systems may not function properly, increasing the risk of losing control in slippery conditions.
How can I diagnose code C0252 on a 2016 GMC Sierra?
Diagnose the issue by scanning the vehicle for additional codes, inspecting wheel speed sensors and wiring, and checking the calibration of the steering angle sensor.
Is it safe to drive with the C0252 code active?
While the vehicle is generally safe for short distances, it’s recommended to address the issue promptly as stability control and traction control may be compromised.
What repairs are commonly needed to fix code C0252?
Common repairs include replacing faulty wheel speed sensors, recalibrating the steering angle sensor, repairing damaged wiring, or, in rare cases, replacing the stability control module.
How much does it cost to fix code C0252 on a 2016 GMC Sierra?
Repair costs can vary, but replacing a wheel speed sensor typically costs $100–$300, while more extensive repairs like module replacement can exceed $1,000.
Can a low battery cause code C0252 to appear?
Yes, a weak or low battery can sometimes cause communication errors in the stability control system, potentially triggering code C0252.
Do I need to recalibrate sensors after fixing code C0252?
Yes, recalibration of sensors like the steering angle sensor may be necessary after repairs to ensure proper operation of the stability control system.
Discuss the causes and fixes for C0252 2016 GMC Sierra OBDII Code
Code C0252 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
