AutoCodesBuick – C0250 Buick

C0250 Buick Code - Right Normal Force Error

Quick Answer

The Electronic Brake Control Module (EBCM) receives invalid information from other modules through the General Motor Local Area Network (GMLAN) serial data bus. Common causes include This is an information code only, check other codes. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0250 Buick indicates Right Normal Force Error.
Common causes
Common causes include This is an information code only, check other codes.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 809
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 04, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0250 Buick Description

The Electronic Brake Control Module (EBCM) receives invalid information from other modules through the General Motor Local Area Network (GMLAN) serial data bus. The EBCM will set DTC based on this information. This Diagnostic Trouble Code (DTC) is for information only. As an aid to the technician, this DTC indicates that there are no problems in the ABS.
OBDII Code C0250 Buick - Right Normal Force Error - AutoCodes.com
C0250 Buick Code - Right Normal Force Error

What are the Possible Causes of the DTC C0250 Buick?

  • This is an information code only, check other codes.

How to Fix the DTC C0250 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0250 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0250 Buick code?

Need more information on how to fix the C0250 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0250 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0250 Buick Code

1. What does the OBDII code C0250 mean on a Buick?

C0250 indicates a "Right Normal Force Error," typically related to the vehicle's electronic brake control system or traction control.

2. What are the common symptoms of the C0250 code on a Buick?

Symptoms may include ABS or traction control warning lights, reduced traction control functionality, or erratic braking performance.

3. What causes the C0250 code to appear on a Buick?

Common causes include a faulty wheel speed sensor, damaged wiring, a malfunctioning electronic brake control module, or issues with the suspension affecting force calculations.

4. Can I drive my Buick with the C0250 code active?

While the car may still be drivable, traction control and ABS functions may be compromised, increasing the risk of loss of control in slippery conditions.

5. How can I diagnose the C0250 code on my Buick?

Diagnosis typically involves scanning for additional ABS-related codes, inspecting wheel speed sensors, checking wiring for damage, and testing the brake control module.

6. What repairs are needed to fix the C0250 code on a Buick?

Repairs may include replacing a faulty wheel speed sensor, repairing damaged wiring, or reprogramming or replacing the electronic brake control module.

7. How much does it cost to fix the C0250 code on a Buick?

Repair costs vary but can range from $100–$300 for a wheel speed sensor replacement to over $1,000 for control module repairs, depending on parts and labor.

8. Can a weak battery cause the C0250 code on a Buick?

In some cases, low voltage from a weak or failing battery can cause electronic brake system errors, including C0250.

9. How can I prevent the C0250 code from recurring on my Buick?

Regularly inspect and maintain the ABS system, wheel speed sensors, and associated wiring to prevent damage or wear that could trigger the code.

10. Do I need to reprogram the ABS module when fixing the C0250 code on a Buick?

Reprogramming may be necessary if the ABS module is replaced or if software updates are required to resolve the issue.

Discuss the causes and fixes for C0250 Buick OBDII Code

Code C0250 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play