AutoCodesBuick – C0228 Buick

C0228 Buick Code - Left Rear ABS Channel in Release Too Long

Quick Answer

As the wheel spins, the wheel speed sensor produces an Alternating Current (AC) signal. Common causes include Faulty Left Front Speed Sensor, Left Front Speed Sensor harness is open or shorted, Left Front Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0228 Buick indicates Left Rear ABS Channel in Release Too Long.
Common causes
Common causes include Faulty Left Front Speed Sensor, Left Front Speed Sensor harness is open or shorted, Left Front Speed Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 927
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 10, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0228 Buick Description

As the wheel spins, the wheel speed sensor produces an Alternating Current (AC) signal. The Electronic Brake Control Module (EBCM) uses the frequency of the AC signal to calculate the wheel speed.
OBDII Code C0228 Buick - Left Rear ABS Channel in Release Too Long - AutoCodes.com
C0228 Buick Code - Left Rear ABS Channel in Release Too Long

What are the Possible Causes of the DTC C0228 Buick?

  • Faulty Left Front Speed Sensor
  • Left Front Speed Sensor harness is open or shorted
  • Left Front Speed Sensor circuit poor electrical connection
  • Faulty EBCM

How to Fix the DTC C0228 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0228 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0228 Buick code?

Need more information on how to fix the C0228 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0228 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0228 Buick Code

1. What does the OBDII code C0228 mean on a Buick?

C0228 indicates a problem with the left rear ABS channel, where the system detects that it has been in the release state for too long.

2. What are the common symptoms of C0228 on a Buick?

Common symptoms include the ABS warning light illuminating, reduced or no ABS functionality, and potential loss of traction control.

3. What causes the C0228 code to appear?

This code is typically caused by a faulty ABS wheel speed sensor, wiring issues, a malfunctioning ABS module, or problems with the hydraulic control unit.

4. Can a damaged wheel speed sensor trigger C0228?

Yes, a damaged or malfunctioning left rear wheel speed sensor can cause the ABS system to misinterpret signals, leading to this code.

5. How can I diagnose the C0228 code on my Buick?

Start by inspecting the left rear ABS sensor and its wiring for damage or corrosion. Use a diagnostic scanner to monitor ABS sensor readings and confirm proper operation.

6. Is it safe to drive with the C0228 code active?

While the vehicle may still be drivable, the ABS and traction control systems may not function properly, increasing the risk of skidding during hard braking or on slippery surfaces.

7. How do I fix the C0228 code on a Buick?

Repairs may include replacing the left rear ABS sensor, repairing damaged wiring or connectors, or addressing issues with the ABS module or hydraulic control unit.

8. Can clearing the C0228 code fix the issue?

Clearing the code may temporarily turn off the ABS warning light, but the issue will return unless the underlying problem is properly diagnosed and repaired.

9. How much does it typically cost to repair the C0228 code on a Buick?

Costs can vary depending on the specific cause, but replacing an ABS sensor typically costs $100–$300, while ABS module repairs can range from $500–$1,000 or more.

10. What tools do I need to troubleshoot the C0228 code?

You’ll need an OBDII scanner with ABS diagnostic capabilities, a multimeter for testing wiring, and potentially a service manual for your Buick model for guidance.

Discuss the causes and fixes for C0228 Buick OBDII Code

Code C0228 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play