AutoCodesPontiac – C0220 Pontiac

C0220 Pontiac Code - Longitudinal Accelerometer Signal Voltage

Quick Answer

The Vehicle Stability Enhancement System (VSES) is activated when the Electronic Brake Control Module (EBCM) determines that the desired yaw rate does not match the actual yaw rate. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module (EBCM) harness is open or shorted, Electronic Brake Control Module (EBCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0220 Pontiac indicates Longitudinal Accelerometer Signal Voltage.
Common causes
Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module (EBCM) harness is open or shorted, Electronic Brake Control Module (EBCM) circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,169
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 09, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0220 Pontiac Description

The Vehicle Stability Enhancement System (VSES) is activated when the Electronic Brake Control Module (EBCM) determines that the desired yaw rate does not match the actual yaw rate. The desired yaw rate is calculated from the measured steering wheel position, vehicle speed, and lateral acceleration. With no sensor bias present, a volt signal from these sensors is interpreted by the EBCM respectively as follows:
- Zero yaw rate.
- Zero lateral acceleration.
- Zero longitudinal acceleration.
The sensor bias compensates, during VSES initialization, for sensor mounting alignment errors, electronic signal errors, temperature changes, and manufacturing differences.
OBDII Code C0220 Pontiac - Longitudinal Accelerometer Signal Voltage - AutoCodes.com
C0220 Pontiac Code - Longitudinal Accelerometer Signal Voltage

What are the Possible Causes of the DTC C0220 Pontiac?

  • Faulty Electronic Brake Control Module (EBCM)
  • Electronic Brake Control Module (EBCM) harness is open or shorted
  • Electronic Brake Control Module (EBCM) circuit poor electrical connection

How to Fix the DTC C0220 Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0220 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0220 Pontiac code?

Need more information on how to fix the C0220 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0220 Pontiac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0220 Pontiac Code

1. What does the OBDII code C0220 on a Pontiac indicate?

The code C0220 on a Pontiac indicates an issue with the Longitudinal Accelerometer Signal Voltage, meaning there is a fault detected in the accelerometer sensor circuit which measures the vehicle's forward or reverse acceleration.

2. What are the common symptoms of code C0220 in a Pontiac?

Common symptoms include the ABS and/or traction control warning lights illuminating, changes in the behavior of the ABS system, possible loss of traction control features, and in some cases, a noticeable change in vehicle handling.

3. What could cause the C0220 code to appear in a Pontiac?

Causes can range from faulty longitudinal accelerometer sensor, damaged wires or connectors in the sensor circuit, issues with the ABS module, or even low voltage conditions due to a weak battery.

4. How is the C0220 code diagnosed in a Pontiac?

Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the accelerometer sensor and its connections for damage or disconnections, checking the vehicle’s voltage levels, and possibly testing the sensor and wiring with a multimeter.

5. What are the steps to fix the C0220 code in a Pontiac?

Repair steps typically include replacing or repairing the faulty longitudinal accelerometer sensor, repairing any damaged wiring or connectors, checking and rectifying any issues with the vehicle’s battery and charging system, or potentially replacing the ABS module if it’s determined to be faulty.

6. Can driving a Pontiac with the C0220 code be dangerous?

While it might not always pose immediate danger, driving with this fault can affect the car’s braking and stability systems, potentially increasing the risk of an accident in adverse driving conditions. It is advisable to address the issue promptly.

7. Is it common for the C0220 code to appear alone?

The C0220 code can appear alone or alongside other codes related to the ABS and traction control systems. It’s important to address all codes simultaneously for a comprehensive repair.

8. How often should the longitudinal accelerometer sensor be checked in a Pontiac?

Regular checks are not typically necessary unless symptoms of a malfunction are noticed. However, it should be inspected during routine vehicle diagnostics or if any related warning lights appear on the dashboard.

9. What tools are needed to diagnose the C0220 code in a Pontiac?

Tools needed include an OBDII scanner, a digital multimeter, and possibly a wiring diagram for the specific model. These tools help in accurately diagnosing and pinpointing issues with electrical circuits and components.

10. Can I fix the C0220 code on my Pontiac by myself?

If you have experience with automotive diagnostics and access to the necessary tools, you might be able to fix the C0220 code yourself. However, due to the complexity associated with sensor and ABS system repairs, it might be advisable to seek professional assistance.

Discuss the causes and fixes for C0220 Pontiac OBDII Code

Code C0220 Pontiac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play