C0201 Chevrolet Code - Anti-Lock Brake System Enable Relay Contact Circuit
Quick Answer
The system relay, located within the Electronic Brake Control Module (EBCM), supplies battery voltage to all of the valve solenoids and to the ABS pump motor. Common causes include Faulty Anti-Lock Brake System Enable Relay, Anti-Lock Brake System Enable Relay harness is open or shorted, Anti-Lock Brake System Enable Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0201 Chevrolet indicates Anti-Lock Brake System Enable Relay Contact Circuit.
- Common causes
- Common causes include Faulty Anti-Lock Brake System Enable Relay, Anti-Lock Brake System Enable Relay harness is open or shorted, Anti-Lock Brake System Enable Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0201 Chevrolet Description
What are the Possible Causes of the DTC C0201 Chevrolet?
- Faulty Anti-Lock Brake System Enable Relay
- Anti-Lock Brake System Enable Relay harness is open or shorted
- Anti-Lock Brake System Enable Relay circuit poor electrical connection
How to Fix the DTC C0201 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0201 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0201 Chevrolet code?
Need more information on how to fix the C0201 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0201 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0201 Chevrolet Code
1. What are the common symptoms of OBDII code C0201 (Chevrolet) related to the Anti-Lock Brake System Enable Relay Contact Circuit?
- Common symptoms include the ABS warning light illuminating on the dashboard, loss of ABS functionality, and potential issues with the vehicle's braking system.
2. What are the possible causes of OBDII code C0201 (Chevrolet) indicating a problem with the Anti-Lock Brake System Enable Relay Contact Circuit?
- Possible causes include a faulty relay, damaged wiring or connectors in the ABS system, a malfunctioning ABS control module, or issues with the vehicle's power supply.
3. How can I diagnose the source of OBDII code C0201 (Chevrolet) involving the Anti-Lock Brake System Enable Relay Contact Circuit?
- Diagnosing the issue typically involves using a diagnostic scanner to read the code, inspecting the relay and related components, checking the wiring for damage, and performing a thorough visual inspection of the ABS system.
4. Is it safe to continue driving with OBDII code C0201 (Chevrolet) triggered by a problem with the Anti-Lock Brake System Enable Relay Contact Circuit?
- It is not recommended to drive the vehicle with this code active, as it may lead to potential safety hazards due to the compromised functionality of the ABS system.
5. How can I repair OBDII code C0201 (Chevrolet) associated with the Anti-Lock Brake System Enable Relay Contact Circuit?
- Repair options may include replacing the faulty relay, repairing damaged wiring or connectors, resetting the ABS control module, or seeking professional assistance to address the specific cause of the issue.
6. Can resetting the OBDII code C0201 (Chevrolet) related to the Anti-Lock Brake System Enable Relay Contact Circuit fix the problem?
- Resetting the code may temporarily clear the warning light, but it will not resolve the underlying issue causing the fault. Proper diagnosis and repair are necessary to address the problem effectively.
7. Are there any DIY tips for troubleshooting OBDII code C0201 (Chevrolet) linked to the Anti-Lock Brake System Enable Relay Contact Circuit?
- DIY tips may include checking the fuse related to the ABS system, inspecting the relay for signs of damage, and ensuring all wiring connections are secure and free of corrosion.
8. How much does it typically cost to repair OBDII code C0201 (Chevrolet) related to the Anti-Lock Brake System Enable Relay Contact Circuit?
- Repair costs can vary depending on the specific cause of the issue, but they may range from a few hundred dollars for simple fixes like replacing a relay to over a thousand dollars for more complex repairs involving the ABS control module.
9. Could extreme weather conditions or rough road surfaces trigger OBDII code C0201 (Chevrolet) indicating a problem with the Anti-Lock Brake System Enable Relay Contact Circuit?
- While extreme conditions may not directly cause this code, they can exacerbate existing issues within the ABS system, leading to the activation of the warning light and the need for repairs.
10. Is it advisable to seek professional help for diagnosing and repairing OBDII code C0201 (Chevrolet) associated with the Anti-Lock Brake System Enable Relay Contact Circuit?
- Yes, it is recommended to consult a qualified mechanic or technician with experience in ABS systems to accurately diagnose and repair the specific cause of the code for optimal safety and performance of the vehicle.
Discuss the causes and fixes for C0201 Chevrolet OBDII Code
Code C0201 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
