C0136 Buick Code - Base Brake System Pressure Circuit/Sensor
Quick Answer
The Electronic Brake Control Module (EBCM) uses an input from 2 brake fluid pressure sensors to enhance ABS braking and vehicle stability if equipped. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module (EBCM) harness is open or shorted, Electronic Brake Control Module (EBCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0136 Buick indicates Base Brake System Pressure Circuit/Sensor.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module (EBCM) harness is open or shorted, Electronic Brake Control Module (EBCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0136 Buick Description
What are the Possible Causes of the DTC C0136 Buick?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module (EBCM) harness is open or shorted
- Electronic Brake Control Module (EBCM) circuit poor electrical connection
How to Fix the DTC C0136 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0136 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0136 Buick code?
Need more information on how to fix the C0136 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0136 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0136 Buick Code
1. What does the OBDII code C0136 mean on a Buick?
The C0136 code indicates an issue with the Base Brake System Pressure Circuit or Sensor, typically involving a fault in the brake pressure signal or its associated wiring.
2. What are the common symptoms of the C0136 code in a Buick?
Symptoms may include the ABS warning light or brake system warning light illuminating, reduced braking performance, or erratic ABS operation.
3. What causes the C0136 code to appear on a Buick?
Common causes include a faulty brake pressure sensor, damaged wiring or connectors, issues with the ABS module, or low brake fluid levels.
4. How can I diagnose the C0136 code on my Buick?
Start by scanning for codes with an OBDII scanner, visually inspecting the brake pressure sensor and wiring, and testing the sensor's output with a multimeter.
5. Can I still drive my Buick with the C0136 code active?
While the vehicle may still be drivable, the braking system’s performance could be compromised, so it’s recommended to address the issue immediately.
6. How do I fix the C0136 code on a Buick?
Repairs may include replacing the brake pressure sensor, repairing or replacing damaged wiring or connectors, or recalibrating the ABS module.
7. How much does it cost to repair the C0136 code on a Buick?
Repair costs vary but typically range from $100 to $300, depending on whether the sensor, wiring, or ABS module requires attention.
8. Can low brake fluid cause the C0136 code on a Buick?
Yes, low brake fluid may affect pressure readings and trigger the C0136 code, so it’s important to check the fluid level.
9. Does the C0136 code require professional repair, or can I fix it myself?
If the issue is wiring or sensor-related and you have automotive repair experience, you may be able to fix it yourself. However, complex ABS module issues often require professional assistance.
10. Will clearing the C0136 code with a scanner fix the problem?
Clearing the code will remove it temporarily, but the issue will return unless the underlying cause is properly repaired.
Discuss the causes and fixes for C0136 Buick OBDII Code
Code C0136 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
