C0131 2014 GMC Sierra Code - Traction Control System Pressure Circuit
Quick Answer
The Electronic Brake Control Module (EBCM) monitors the brake pressure sensor which is integral to the Brake Pressure Modulator Valve (BPMV). Common causes include Faulty Electronic Brake Control Module (EBCM) with Brake Pressure Modulator Valve (BPMV), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0131 2014 GMC Sierra indicates Traction Control System Pressure Circuit.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM) with Brake Pressure Modulator Valve (BPMV), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0131 2014 GMC Sierra Description
What are the Possible Causes of the DTC C0131 2014 GMC Sierra?
- Faulty Electronic Brake Control Module (EBCM) with Brake Pressure Modulator Valve (BPMV)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
How to Fix the DTC C0131 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0131 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0131 2014 GMC Sierra code?
Need more information on how to fix the C0131 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0131 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0131 2014 GMC Sierra Code
1. What does the OBDII code C0131 mean on a 2014 GMC Sierra?
C0131 indicates an issue with the Traction Control System (TCS) Pressure Circuit, often involving a malfunction in the brake pressure sensor or related components.
2. What are the common symptoms of code C0131 in a 2014 GMC Sierra?
Symptoms include the ABS or traction control warning light, reduced traction control functionality, and in some cases, a spongy or unresponsive brake pedal.
3. What causes the C0131 code to appear in a 2014 GMC Sierra?
Common causes include a faulty brake pressure sensor, damaged wiring or connectors in the TCS circuit, or a malfunctioning Electronic Brake Control Module (EBCM).
4. How do I diagnose the C0131 code on my 2014 GMC Sierra?
Start by scanning for additional codes, inspecting the brake pressure sensor and its wiring for damage, and testing the sensor’s output voltage to ensure it falls within the specified range.
5. Can I drive my 2014 GMC Sierra with the C0131 code active?
Driving with this code is not recommended, as it may disable important safety systems like ABS and traction control, increasing the risk of losing control in slippery conditions.
6. How is the C0131 code typically fixed on a 2014 GMC Sierra?
Repairs may involve replacing the brake pressure sensor, repairing damaged wiring or connectors, or reprogramming or replacing the EBCM if necessary.
7. How much does it cost to fix the C0131 code on a 2014 GMC Sierra?
Repair costs can vary but typically range from $150 to $500, depending on whether the issue is with the sensor, wiring, or EBCM.
8. Can a low brake fluid level cause the C0131 code in a 2014 GMC Sierra?
While not a direct cause, low brake fluid can lead to system malfunctions that might trigger the code. Always ensure brake fluid levels are adequate before diagnosing further.
9. How can I prevent the C0131 code from reoccurring in my 2014 GMC Sierra?
Regular maintenance, such as inspecting brake components, ensuring proper fluid levels, and addressing wiring issues promptly, can help prevent this code from returning.
10. Is a brake pressure sensor calibration required after replacing it on a 2014 GMC Sierra?
Yes, recalibrating the brake pressure sensor may be necessary to ensure proper operation of the ABS and traction control systems.
Discuss the causes and fixes for C0131 2014 GMC Sierra OBDII Code
Code C0131 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
