C0113 GMC Code - Pump Motor Circuit
Quick Answer
The system relay is energized when the ignition is ON. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module (EBCM) harness is open or shorted, Electronic Brake Control Module (EBCM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0113 GMC indicates Pump Motor Circuit.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module (EBCM) harness is open or shorted, Electronic Brake Control Module (EBCM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0113 GMC Description
- Transfers brake fluid from the brake calipers to the master cylinder reservoir during pressure decrease events.
- Transfers brake fluid from the master cylinder reservoir to the brake calipers during pressure increase events.
What are the Possible Causes of the DTC C0113 GMC?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module (EBCM) harness is open or shorted
- Electronic Brake Control Module (EBCM) circuit poor electrical connection
How to Fix the DTC C0113 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0113 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0113 GMC code?
Need more information on how to fix the C0113 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0113 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0113 GMC Code
1. What are common symptoms of OBDII code C0113 in a GMC vehicle?
The common symptoms of OBDII code C0113 (Pump Motor Circuit) in a GMC vehicle include the ABS warning light illuminating on the dashboard, potential loss of ABS functionality, and unusual brake behavior.
2. What typically causes the OBDII code C0113 in a GMC vehicle?
The OBDII code C0113 in a GMC vehicle is usually triggered by a fault in the pump motor circuit of the Anti-Lock Brake System (ABS). This can be due to issues such as damaged wiring, a faulty pump motor, or a malfunctioning ABS control module.
3. How can I diagnose the OBDII code C0113 in my GMC vehicle?
Diagnosing the OBDII code C0113 in a GMC vehicle involves using a diagnostic scanner to retrieve the trouble codes, inspecting the ABS system components for any visible damage or corrosion, and testing the pump motor and related circuits for proper functionality.
4. Are there any simple repair tips for fixing the OBDII code C0113 in a GMC vehicle?
Some simple repair tips for addressing the OBDII code C0113 in a GMC vehicle include checking and repairing any damaged wiring or connectors in the pump motor circuit, testing and replacing a faulty pump motor if necessary, and clearing the trouble codes with a diagnostic scanner.
5. Can I continue to drive my GMC vehicle with the OBDII code C0113 present?
It is not recommended to drive your GMC vehicle with the OBDII code C0113 (Pump Motor Circuit) present, as it indicates a potential issue with the Anti-Lock Brake System (ABS), which can compromise your vehicle's braking performance and safety.
6. Will resetting the OBDII code C0113 make it go away permanently?
Resetting the OBDII code C0113 may temporarily clear the code from the system, but if the underlying issue in the pump motor circuit is not addressed and repaired, the code is likely to reappear once the ABS system detects the fault again.
7. How much does it typically cost to repair the OBDII code C0113 in a GMC vehicle?
The cost of repairing the OBDII code C0113 in a GMC vehicle can vary depending on the specific cause of the issue, the extent of the repairs needed, and the labor rates of the service provider. It is advisable to consult with a professional mechanic for an accurate estimate.
8. Can a DIY enthusiast fix the OBDII code C0113 in a GMC vehicle?
While some DIY enthusiasts may have the skills and tools to diagnose and repair the OBDII code C0113 in a GMC vehicle, it is recommended to seek assistance from a qualified mechanic or technician due to the complexity of the ABS system and the importance of proper repairs for safety.
9. How long does it take to repair the OBDII code C0113 in a GMC vehicle?
The time required to repair the OBDII code C0113 in a GMC vehicle can vary depending on the specific cause of the issue, the availability of replacement parts, and the expertise of the mechanic. In general, the repair process can take a few hours to a full day.
10. Is it necessary to have the OBDII code C0113 repaired immediately?
It is advisable to address and repair the OBDII code C0113 in a GMC vehicle as soon as possible to ensure the proper functioning of the Anti-Lock Brake System (ABS) and maintain optimal braking performance and safety while driving.
Discuss the causes and fixes for C0113 GMC OBDII Code
Code C0113 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
