AutoCodes – Subaru – C0110 Subaru

C0110 Subaru Code - ABS Control Module Malfunction

Quick Answer

The Engine Control Module (ECM) monitors the ABS Control Module. Common causes include Faulty ABS Control Module, ABS Control Module harness is open or shorted, ABS Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0110 Subaru indicates ABS Control Module Malfunction.
Common causes: Common causes include Faulty ABS Control Module, ABS Control Module harness is open or shorted, ABS Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,495

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 05, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0110 Subaru Description

The Engine Control Module (ECM) monitors the ABS Control Module. The ECM sets the OBDII code when the ABS Control Module is not to factory specifications.

OBDII Code C0110 Subaru - ABS Control Module Malfunction - AutoCodes.com — C0110 Subaru Code - ABS Control Module Malfunction

What does this mean?

What are the Possible Causes of the DTC C0110 Subaru?

Faulty ABS Control Module
ABS Control Module harness is open or shorted
ABS Control Module circuit poor electrical connection

How to Fix the DTC C0110 Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0110 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0110 Subaru code?

Need more information on how to fix the C0110 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0110 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0110 Subaru Code

1. What are the common symptoms of OBDII code C0110 in a Subaru related to ABS Control Module Malfunction?

- Common symptoms include the ABS warning light staying illuminated on the dashboard, loss of ABS functionality, and possible issues with the vehicle stability control system.

2. What are the potential causes of OBDII code C0110 indicating an ABS Control Module Malfunction in a Subaru?

- The code may be triggered by a faulty ABS control module, damaged wiring harness, defective wheel speed sensors, or issues with the ABS hydraulic unit.

3. How can I diagnose OBDII code C0110 related to ABS Control Module Malfunction in my Subaru?

- Diagnosis involves using an OBDII scanner to retrieve the code, conducting a visual inspection of the ABS system components, checking the wiring for any damage, and testing the wheel speed sensors.

4. Is it safe to drive my Subaru with OBDII code C0110 indicating an ABS Control Module Malfunction?

- It is not recommended to drive the vehicle with a malfunctioning ABS system, as it may compromise your ability to brake safely in emergency situations. Seek professional repair assistance promptly.

5. Can I reset OBDII code C0110 related to ABS Control Module Malfunction in my Subaru using a basic code reader?

- While you can clear the code temporarily with a basic code reader, it is crucial to address the underlying issue causing the malfunction to prevent the code from reoccurring.

6. What are some repair tips for addressing OBDII code C0110 indicating an ABS Control Module Malfunction in a Subaru?

- Repair tips include checking and repairing damaged wiring, replacing faulty wheel speed sensors, testing and potentially replacing the ABS control module, and ensuring all connections are secure.

7. Do I need specialized tools to repair OBDII code C0110 related to ABS Control Module Malfunction in my Subaru?

- While specialized tools may be required for advanced diagnostics, basic tools such as a multimeter, socket set, and OBDII scanner are typically sufficient for basic repairs related to this code.

8. How much does it cost to fix OBDII code C0110 associated with an ABS Control Module Malfunction in a Subaru?

- The cost of repairs can vary depending on the specific issue causing the code, but it may range from a few hundred dollars for sensor replacement to over a thousand dollars for ABS control module replacement.

9. Can a DIY enthusiast with moderate mechanical skills repair OBDII code C0110 related to ABS Control Module Malfunction in a Subaru?

- While some basic repairs like sensor replacement may be within reach for a DIY enthusiast, diagnosing and fixing complex issues like ABS control module failure may require professional expertise.

10. Are there any recalls or technical service bulletins related to OBDII code C0110 and ABS Control Module Malfunction in Subaru vehicles?

- It is advisable to check with Subaru dealerships or online resources for any recalls or technical service bulletins related to this specific OBDII code to stay informed about potential manufacturer-acknowledged issues.