C0064 Code - Roll Rate Sensor
Quick Answer
The Engine Control Module (ECM) monitors the Roll Rate Sensor. Common causes include Faulty Roll Rate Sensor, Roll Rate Sensor harness is open or shorted, Roll Rate Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C0064 indicates Roll Rate Sensor.
- Common causes
- Common causes include Faulty Roll Rate Sensor, Roll Rate Sensor harness is open or shorted, Roll Rate Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C0064 Description
What are the Possible Causes of the DTC C0064?
- Faulty Roll Rate Sensor
- Roll Rate Sensor harness is open or shorted
- Roll Rate Sensor circuit poor electrical connection
How to Fix the DTC C0064?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C0064 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C0064 code?
Need more information on how to fix the C0064 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C0064 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C0064 Code
1. What does OBDII code C0064 indicate?
The OBDII code C0064 indicates a problem with the Roll Rate Sensor in the vehicle's stability control system.
2. What are the common symptoms of a faulty Roll Rate Sensor?
Common symptoms of a faulty Roll Rate Sensor include the stability control light illuminating on the dashboard, issues with vehicle stability and handling, and potential activation of the vehicle's stability control system.
3. What are possible causes of OBDII code C0064?
Possible causes of OBDII code C0064 include a malfunctioning Roll Rate Sensor, damaged wiring or connectors related to the sensor, or issues with the vehicle's stability control system.
4. How can I diagnose a Roll Rate Sensor issue?
Diagnosing a Roll Rate Sensor issue typically involves using a professional diagnostic scanner to read the OBDII code, inspecting the sensor and its wiring for any visible damage, and conducting further testing to determine the exact cause of the problem.
5. Can a faulty Roll Rate Sensor be repaired, or does it need to be replaced?
In some cases, a faulty Roll Rate Sensor may be repairable by fixing wiring issues or sensor calibration. However, if the sensor itself is damaged or malfunctioning, replacement is often necessary.
6. Are there any DIY repair tips for OBDII code C0064?
DIY repair tips for OBDII code C0064 include checking the sensor's wiring and connectors for damage, ensuring proper sensor calibration if applicable, and consulting a repair manual or professional for guidance.
7. How important is it to address OBDII code C0064 promptly?
It is important to address OBDII code C0064 promptly as a faulty Roll Rate Sensor can affect the vehicle's stability and handling, potentially compromising safety on the road.
8. Can driving with OBDII code C0064 cause further damage to the vehicle?
Continuing to drive with OBDII code C0064 may not only worsen stability control issues but also potentially lead to additional damage to the vehicle's stability control system or other related components.
9. How much does it typically cost to repair a Roll Rate Sensor issue?
The cost of repairing a Roll Rate Sensor issue can vary depending on the extent of the problem, the vehicle make and model, and whether the sensor can be repaired or needs to be replaced. Costs may range from a few hundred to over a thousand dollars.
10. Is it necessary to reset the OBDII system after repairing a Roll Rate Sensor problem?
After repairing a Roll Rate Sensor problem, it is recommended to reset the OBDII system using a diagnostic scanner to clear the error code and ensure proper functionality of the stability control system.
Discuss the causes and fixes for C0064 OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
