AutoCodesGMC – C0055 GMC

C0055 GMC Code - Rear Wheel Speed Sensor Circuit

Quick Answer

The Electronic Control Module (ECM) convert the data from the chicle speed sensor to a 128K pulse/mile signal. Common causes include Faulty Rear Wheel Speed Sensor, Rear Wheel Speed Sensor harness is open or shorted, Rear Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C0055 GMC indicates Rear Wheel Speed Sensor Circuit.
Common causes
Common causes include Faulty Rear Wheel Speed Sensor, Rear Wheel Speed Sensor harness is open or shorted, Rear Wheel Speed Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,698
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 02, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0055 GMC Description

The Electronic Control Module (ECM) convert the data from the chicle speed sensor to a 128K pulse/mile signal. The Electronic Brake Control Module (EBCM) uses the vehicle speed signal from the ECM in order to calculate the rear wheel speed.
OBDII Code C0055 GMC - Rear Wheel Speed Sensor Circuit - AutoCodes.com
C0055 GMC Code - Rear Wheel Speed Sensor Circuit

What are the Possible Causes of the DTC C0055 GMC?

  • Faulty Rear Wheel Speed Sensor
  • Rear Wheel Speed Sensor harness is open or shorted
  • Rear Wheel Speed Sensor circuit poor electrical connection

How to Fix the DTC C0055 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0055 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0055 GMC code?

Need more information on how to fix the C0055 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0055 GMC code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0055 GMC Code

1. What are the common symptoms of OBDII code C0055 GMC (Rear Wheel Speed Sensor Circuit)?

- Common symptoms include the ABS warning light being illuminated on the dashboard, traction control issues, and potential loss of stability control.

2. What are the most common causes of OBDII code C0055 GMC?

- The most common causes are a faulty rear wheel speed sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning ABS control module.

3. How can I diagnose the issue related to OBDII code C0055 GMC?

- You can diagnose the issue by performing a visual inspection of the rear wheel speed sensor and its wiring, checking for any visible damage. Using a diagnostic scanner to read the ABS system codes can also help pinpoint the problem.

4. What are some repair tips for addressing OBDII code C0055 GMC?

- Repair tips include checking and cleaning the wheel speed sensor connectors, ensuring the sensor is properly installed and functioning, and checking the ABS control module for any issues.

5. Can I drive my vehicle with OBDII code C0055 GMC present?

- It is not recommended to drive the vehicle with this code present, as it can affect the proper functioning of the ABS system and compromise the vehicle's safety features.

6. How much does it typically cost to repair OBDII code C0055 GMC?

- The cost of repair can vary depending on the specific issue causing the code, but it may range from $100 to $300 for parts and labor.

7. Are there any DIY fixes for OBDII code C0055 GMC?

- Some DIY fixes include checking and cleaning the wheel speed sensor connectors, inspecting the sensor and wiring for damage, and resetting the ABS system using a diagnostic scanner.

8. What tools are needed to diagnose and repair OBDII code C0055 GMC?

- Tools needed may include a diagnostic scanner, multimeter for testing electrical connections, wrenches or sockets for removing components, and possibly a soldering iron for repairing wiring.

9. How important is it to address OBDII code C0055 GMC promptly?

- It is important to address this code promptly to ensure the proper functioning of the ABS system and maintain the safety features of the vehicle.

10. Can OBDII code C0055 GMC be a recurring issue?

- Yes, if the root cause of the code is not properly addressed, it can reoccur and potentially lead to further issues with the ABS system over time.

Discuss the causes and fixes for C0055 GMC OBDII Code

  • I have a 09 gmc sierra crew cab 4x4 diesel. I keep getting a brake light and a abs light then the check eng. light comes on. Trans. go's in to safe mod. the code is C0055, I all so have a code P0571.

  • I can't find any information about the C0055 code in the factory service manual, but the P0571 is for the Cruise Control/Brake Switch, which will set either or all the warning light you mention.

    P0571 GMC - Cruise Control/Brake Switch 'A' Circuit Malfunction
    Read more: https://www.autocodes.com/p...

  • I replaced the brake switch today did a road test cruise control now works great. Bought a rear wheel speed sensor that goes in the transmission transfer case will see what happens with this? But will let you know. Thanks for your help.

  • Replaced the rear wheel speed sensor road tested in a bout a mile or so the lights safe mode again now I guess the as to relearn? I will be chasing wires.

  • What is the engine size of your Sierra? let me check if I can find any information about the C0055 code.

  • 6.6 L turbo diesel with 6 speed trasm.

  • Unfortunately I still can't find any information about the C0055 code in the factory service manual, service database or even the internet for your model year. Please double check the code. You could try using a different scanner.

    Image

    Click here to enlarge image

  • It's possible that the scanner you have is showing the C0055 code instead of the C005A, then the problem is not the speed sensor on the transmission, but one of the sensors on the wheels.

    C005A GMC - Rear Wheel Speed Sensor Circuit
    Read more: https://www.autocodes.com/c...

    Image

    Click here to enlarge image

  • I just did road test after chasing wires and checking cannon plugs so far no safety mode on trans. Next is the brakes I’am going change the rotors.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play