AutoCodes – Jeep – C0051 Jeep

C0051 Jeep Code - Steering Wheel Position Sensor

Quick Answer

The Anti-Lock Brake System (ABS) Module monitors the Steering Wheel Position Sensor. Common causes include Faulty Steering Wheel Position Sensor, Steering Wheel Position Sensor harness is open or shorted, Steering Wheel Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0051 Jeep indicates Steering Wheel Position Sensor.
Common causes: Common causes include Faulty Steering Wheel Position Sensor, Steering Wheel Position Sensor harness is open or shorted, Steering Wheel Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,153

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 02, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0051 Jeep Description

The Anti-Lock Brake System (ABS) Module monitors the Steering Wheel Position Sensor. The ABS Module sets the OBDII code when the Steering Wheel Position Sensor is not to factory specifications.

OBDII Code C0051 Jeep - Steering Wheel Position Sensor - AutoCodes.com — C0051 Jeep Code - Steering Wheel Position Sensor

What does this mean?

What are the Possible Causes of the DTC C0051 Jeep?

Faulty Steering Wheel Position Sensor
Steering Wheel Position Sensor harness is open or shorted
Steering Wheel Position Sensor circuit poor electrical connection

How to Fix the DTC C0051 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0051 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0051 Jeep code?

Need more information on how to fix the C0051 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0051 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0051 Jeep Code

1. What are the common symptoms of OBDII code C0051 in a Jeep related to the Steering Wheel Position Sensor?

- Common symptoms include the check engine light illuminating, issues with stability control, and potential steering wheel calibration problems.

2. What usually causes OBDII code C0051 in a Jeep?

- The code C0051 in a Jeep is typically triggered by a malfunction in the Steering Wheel Position Sensor or its wiring.

3. How can I diagnose the Steering Wheel Position Sensor issue causing OBDII code C0051 in my Jeep?

- Proper diagnosis involves using a diagnostic scan tool to read the code, inspecting the sensor and its connections, and performing any necessary resets or calibrations.

4. Can a DIY enthusiast repair the Steering Wheel Position Sensor issue triggering OBDII code C0051 in a Jeep?

- While some enthusiasts may attempt the repair, it is recommended to have a professional mechanic diagnose and fix the issue to ensure proper repair and calibration.

5. Are there any quick fixes or temporary solutions for OBDII code C0051 in a Jeep?

- Quick fixes or temporary solutions are not recommended for OBDII code C0051 related to the Steering Wheel Position Sensor, as addressing the root cause is crucial for safety and performance.

6. How critical is it to address OBDII code C0051 in a Jeep promptly?

- Promptly addressing OBDII code C0051 is crucial to maintain safe driving conditions, ensure proper vehicle stability, and prevent potential steering issues.

7. Is it safe to drive a Jeep with OBDII code C0051 related to the Steering Wheel Position Sensor?

- It is not recommended to drive the Jeep with OBDII code C0051, as the issue can affect steering performance and stability control, potentially compromising safety.

8. How much does it typically cost to repair OBDII code C0051 in a Jeep caused by the Steering Wheel Position Sensor malfunction?

- The cost of repairing OBDII code C0051 can vary depending on the extent of the issue, but it may involve sensor replacement, wiring repairs, and calibration, which can range from a few hundred to over a thousand dollars.

9. Can weather or environmental conditions trigger OBDII code C0051 in a Jeep?

- Weather and environmental conditions can indirectly affect the Steering Wheel Position Sensor, potentially leading to the triggering of OBDII code C0051 due to increased wear or electrical issues.

10. How often should the Steering Wheel Position Sensor be inspected to prevent OBDII code C0051 in a Jeep?

- It is recommended to include regular inspections of the Steering Wheel Position Sensor during routine maintenance checks to detect any potential issues early and prevent the triggering of OBDII code C0051.