AutoCodesPontiac – B3723 Pontiac

B3723 Pontiac Code - Rear Wiper Relay Drive Circuit High

Quick Answer

When operation of the rear wiper is selected, battery voltage from the rear wiper switch is applied to the rear wiper switch signal input circuit of the Body Control Module (BCM)). Common causes include Faulty Rear Wiper Relay, Rear Wiper Relay harness is open or shorted, Rear Wiper Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B3723 Pontiac indicates Rear Wiper Relay Drive Circuit High.
Common causes
Common causes include Faulty Rear Wiper Relay, Rear Wiper Relay harness is open or shorted, Rear Wiper Relay circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 462
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 15, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3723 Pontiac Description

When operation of the rear wiper is selected, battery voltage from the rear wiper switch is applied to the rear wiper switch signal input circuit of the Body Control Module (BCM)). The BCM responds by switching the rear wiper relay control circuit to ground. This action energizes the rear wiper relay, providing power to the rear wiper motor. The Diagnostic Trouble Code (DTC) sets when the rear wiper relay control circuit is shorted to battery.
OBDII Code B3723 Pontiac - Rear Wiper Relay Drive Circuit High - AutoCodes.com
B3723 Pontiac Code - Rear Wiper Relay Drive Circuit High

What are the Possible Causes of the DTC B3723 Pontiac?

  • Faulty Rear Wiper Relay
  • Rear Wiper Relay harness is open or shorted
  • Rear Wiper Relay circuit poor electrical connection
  • Faulty Body Control Module (BCM)

How to Fix the DTC B3723 Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3723 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3723 Pontiac code?

Need more information on how to fix the B3723 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3723 Pontiac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3723 Pontiac Code

1. What does the OBDII code B3723 mean for a Pontiac?

The B3723 code indicates an issue with the Rear Wiper Relay Drive Circuit, specifically that it is showing a high voltage condition.

2. What are the common symptoms of code B3723 in a Pontiac?

Common symptoms include the rear wiper not functioning, the wiper getting stuck in one position, or erratic wiper behavior.

3. What causes the B3723 code to appear in a Pontiac?

The main causes include a faulty rear wiper relay, damaged wiring or connectors in the wiper circuit, or a malfunctioning rear wiper motor.

4. Can a bad relay cause the B3723 code?

Yes, a bad rear wiper relay can cause the circuit to show high voltage, triggering the B3723 code.

5. How can I diagnose the B3723 code in a Pontiac?

Start by inspecting the rear wiper relay, wiring, and connectors for damage or corrosion. Use a multimeter to check for proper voltage and continuity in the circuit.

6. Is it safe to drive with the B3723 code present?

Yes, it is generally safe to drive, but the rear wiper may not function properly, which can be a problem in poor weather conditions.

7. How do I fix the B3723 code on my Pontiac?

Repairs may include replacing the rear wiper relay, repairing damaged wiring or connectors, or replacing the rear wiper motor if it’s faulty.

8. How much does it cost to repair the B3723 code?

The repair cost varies, but replacing a rear wiper relay typically costs $20-$50 for the part, while labor costs can depend on the shop rate.

9. Can I clear the B3723 code without repairing it?

You can clear the code with an OBDII scanner, but if the problem isn’t fixed, the code will likely return.

10. Does the B3723 code affect other vehicle systems?

No, the B3723 code is specific to the rear wiper system and does not usually impact other vehicle systems.

Discuss the causes and fixes for B3723 Pontiac OBDII Code

Code B3723 Pontiac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play