AutoCodes – Generic – B3674

B3674 Code - Movable Roof Control Valve 1 Circuit

Quick Answer

The folding top uses electronically controlled valves to control the flow of hydraulic fluid. Common causes include Faulty Movable Roof Control Valve, Movable Roof Control Valve harness is open or shorted, Movable Roof Control Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B3674 indicates Movable Roof Control Valve 1 Circuit.
Common causes
Common causes include Faulty Movable Roof Control Valve, Movable Roof Control Valve harness is open or shorted, Movable Roof Control Valve circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 737
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 13, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B3674 Description

The folding top uses electronically controlled valves to control the flow of hydraulic fluid. The Folding Top Control (FTC) Module controls Valve 1 (V1) by supplying voltage to the valve. The FTC Module also monitors the control circuit of V1 for proper operation. The Diagnostic Trouble Code (DTC) sets if an open or short to ground is detected on the control circuit of V1.
OBDII Code B3674 - Movable Roof Control Valve 1 Circuit - AutoCodes.com
B3674 Code - Movable Roof Control Valve 1 Circuit

What are the Possible Causes of the DTC B3674?

  • Faulty Movable Roof Control Valve
  • Movable Roof Control Valve harness is open or shorted
  • Movable Roof Control Valve circuit poor electrical connection
  • Faulty Folding Top Control (FTC) Module

How to Fix the DTC B3674?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3674 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3674 code?

Need more information on how to fix the B3674 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3674 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3674 Code

1. What are the common symptoms of OBDII code B3674?

- The common symptoms of code B3674 include issues with the operation of the movable roof, such as failure to open or close properly, erratic movement, or total malfunction.

2. What are the possible causes of OBDII code B3674?

- The possible causes of code B3674 can include a faulty movable roof control valve 1, damaged wiring or connectors related to the valve, or a malfunction in the control module.

3. How can I diagnose OBDII code B3674?

- Diagnosing code B3674 involves using a scan tool to retrieve the code, inspecting the movable roof control valve 1 and associated wiring for any visible damage, and conducting a thorough system test.

4. What are the recommended repair tips for OBDII code B3674?

- Repair tips for code B3674 may include replacing the faulty movable roof control valve 1, repairing or replacing damaged wiring or connectors, and resetting the control module after completing repairs.

5. Can OBDII code B3674 be cleared/reset without fixing the underlying issue?

- While you can clear/reset code B3674 using a scan tool, it is not recommended to do so without addressing the underlying issue, as the problem will likely persist and trigger the code again.

6. Is it safe to drive with OBDII code B3674 present?

- It is generally not recommended to drive with OBDII code B3674 present, as it can affect the operation of the movable roof and compromise vehicle safety and functionality.

7. How much does it typically cost to repair OBDII code B3674?

- The cost of repairing OBDII code B3674 can vary depending on the specific cause of the issue, but it may involve parts and labor costs ranging from $100 to $500 or more.

8. Can I repair OBDII code B3674 myself, or should I seek professional help?

- Repairing OBDII code B3674 may require specialized knowledge and tools, so it is advisable to seek professional help from a qualified mechanic or technician for an accurate diagnosis and proper repair.

9. Are there any preventive measures to avoid OBDII code B3674 in the future?

- To prevent OBDII code B3674 in the future, it is recommended to perform regular maintenance checks on the movable roof system, address any issues promptly, and follow the manufacturer's maintenance schedule.

10. How long does it take to repair OBDII code B3674?

- The time it takes to repair OBDII code B3674 can vary depending on the extent of the issue, availability of parts, and the skill level of the technician, but it may take a few hours to a full day to complete the repair.

Discuss the causes and fixes for B3674 OBDII Code

Code B3674 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play