B3650 Code - High Beam Request Signal Circuit Performance Signal Invalid
Quick Answer
When the low beam headlamps are on and the turn signal/multifunction switch is placed in the high beam position, ground is applied to the Body Control Module (BCM) through the high beam signal circuit. Common causes include Faulty Turn Signal/Multifunction Switch, Turn Signal/Multifunction Switch harness is open or shorted, Turn Signal/Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3650 indicates High Beam Request Signal Circuit Performance Signal Invalid.
- Common causes
- Common causes include Faulty Turn Signal/Multifunction Switch, Turn Signal/Multifunction Switch harness is open or shorted, Turn Signal/Multifunction Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B3650 Description
What are the Possible Causes of the DTC B3650?
- Faulty Turn Signal/Multifunction Switch
- Turn Signal/Multifunction Switch harness is open or shorted
- Turn Signal/Multifunction Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B3650?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B3650 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B3650 code?
Need more information on how to fix the B3650 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3650 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B3650 Buick — High Beam Request Signal Circuit Performance Signal Invalid
- B3650 Cadillac — High Beam Request Signal Circuit Performance Signal Invalid
- B3650 Chevrolet — High Beam Request Signal Circuit Performance Signal Invalid
- B3650 GMC — High Beam Request Signal Circuit Performance Signal Invalid
Frequently Asked Questions about B3650 Code
1. What are the common symptoms of OBDII code B3650, High Beam Request Signal Circuit Performance Signal Invalid?
- Common symptoms include issues with high beam headlights not working, the high beam indicator not functioning properly, or dashboard warning lights related to the high beams.
2. What are the possible causes of OBDII code B3650?
- The code B3650 can be triggered by a faulty high beam switch, a defective high beam relay, damaged wiring or connectors in the high beam circuit, or a malfunctioning body control module.
3. How can I diagnose the High Beam Request Signal Circuit Performance Signal Invalid code?
- Diagnosing the code involves checking the high beam switch operation, testing the high beam relay, inspecting the wiring and connectors for any damage, and scanning the body control module for related faults.
4. Can a blown fuse cause the OBDII code B3650 to appear?
- Yes, a blown fuse in the high beam circuit can cause the B3650 code to trigger due to a loss of power to the high beam system.
5. Is it safe to drive with the B3650 code present?
- It is generally safe to drive with the B3650 code, but it is recommended to address the issue promptly to ensure proper functioning of the high beam headlights, especially in low visibility conditions.
6. How can I repair the High Beam Request Signal Circuit Performance Signal Invalid code?
- Repair options include replacing the faulty high beam switch, repairing or replacing damaged wiring and connectors, checking and replacing the high beam relay if necessary, and reprogramming the body control module if needed.
7. Can a DIY enthusiast fix the B3650 code, or is professional help recommended?
- Depending on your experience and knowledge of automotive electrical systems, you may be able to address the B3650 code yourself by following repair guides and using proper diagnostic tools. However, if you are unsure, seeking professional help is recommended.
8. Will resetting the OBDII system clear the B3650 code?
- Resetting the OBDII system may temporarily clear the code, but if the underlying issue causing the B3650 code is not fixed, it is likely to reappear after driving cycles.
9. Are there any preventive maintenance measures to avoid the B3650 code in the future?
- Regularly checking the high beam system, ensuring proper maintenance of electrical components, and addressing any issues promptly can help prevent the B3650 code from appearing in the future.
10. How much can I expect to pay for repairs related to the OBDII code B3650?
- Repair costs for the B3650 code can vary depending on the specific cause of the issue, the extent of the repairs needed, and whether you choose to address it yourself or seek professional help. It is recommended to obtain quotes from mechanics or repair shops for an accurate estimate.
Discuss the causes and fixes for B3650 OBDII Code
Code B3650 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
