AutoCodesChevrolet – B3631 2016 Chevrolet Silverado

B3631 2016 Chevrolet Silverado Code - Adjustable Foot Pedal Inhibit Circuit

Quick Answer

Voltage to the adjustable pedal switch is supplied through the park enable relay while in a de-energized state. Common causes include Faulty Instrument Panel Fuse Block, Instrument Panel Fuse Block harness is open or shorted, Instrument Panel Fuse Block circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B3631 2016 Chevrolet Silverado indicates Adjustable Foot Pedal Inhibit Circuit.
Common causes
Common causes include Faulty Instrument Panel Fuse Block, Instrument Panel Fuse Block harness is open or shorted, Instrument Panel Fuse Block circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 186
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3631 2016 Chevrolet Silverado Description

Voltage to the adjustable pedal switch is supplied through the park enable relay while in a de-energized state. The transmission park relay is controlled by the Body Control Module (BCM) through a low side drive control circuit and will be energized whenever the ignition is in the accessory, run, or crank positions and the transmission is in the P (Park) position. The Diagnostic Trouble Code (DTC) sets when the BCM detects a short to ground on the transmission park relay control circuit while attempting to activate the output.
OBDII Code B3631 2016 Chevrolet Silverado - Adjustable Foot Pedal Inhibit Circuit - AutoCodes.com
B3631 2016 Chevrolet Silverado Code - Adjustable Foot Pedal Inhibit Circuit

What are the Possible Causes of the DTC B3631 2016 Chevrolet Silverado?

  • Faulty Instrument Panel Fuse Block
  • Instrument Panel Fuse Block harness is open or shorted
  • Instrument Panel Fuse Block circuit poor electrical connection
  • Faulty Body Control Module (BCM)

How to Fix the DTC B3631 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3631 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3631 2016 Chevrolet Silverado code?

Need more information on how to fix the B3631 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3631 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3631 2016 Chevrolet Silverado Code

1. What does the OBDII code B3631 mean on a 2016 Chevrolet Silverado?

The code B3631 indicates an issue with the Adjustable Foot Pedal Inhibit Circuit, which prevents the adjustable pedal system from functioning properly.

2. What are the common symptoms of the B3631 code?

Common symptoms include the adjustable foot pedals not responding, a warning light on the dashboard, or intermittent pedal movement.

3. What causes the B3631 code on a 2016 Chevrolet Silverado?

The code can be caused by a faulty pedal position sensor, damaged wiring or connectors in the inhibit circuit, or a malfunctioning adjustable pedal assembly.

4. Can a blown fuse cause the B3631 code?

Yes, a blown fuse related to the adjustable pedal system can cause the B3631 code to appear.

5. How can I diagnose the B3631 code on my Silverado?

Start by visually inspecting the wiring and connectors for damage, check the fuse for the pedal system, and test the pedal position sensor with a multimeter.

6. Is the B3631 code serious?

While not critical for vehicle operation, the code may limit comfort and drivability, especially if the pedals are locked in an inconvenient position.

7. How do I fix the B3631 code on my Silverado?

Repairs may include replacing a damaged pedal position sensor, repairing faulty wiring, or replacing the adjustable pedal assembly if necessary.

8. Can I clear the B3631 code without fixing the issue?

Clearing the code without addressing the underlying problem may temporarily turn off the warning but the code will likely return.

9. How much does it cost to repair the B3631 code?

Repair costs vary but replacing a pedal position sensor typically costs $150–$300, while fixing wiring issues or replacing the pedal assembly may cost more.

10. Can driving with the B3631 code cause further damage?

Driving with the code is unlikely to cause further damage, but it may affect comfort and safety if the pedal position is not adjustable.

Discuss the causes and fixes for B3631 2016 Chevrolet Silverado OBDII Code

Code B3631 2016 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play