B3596 2018 Chevrolet Silverado Code - Hazard Lamps Request Circuit Malfunction
Quick Answer
The hazard flashers may be activated in any power mode. Common causes include Faulty Turn Signal/Multifunction Switch, Turn Signal/Multifunction Switch harness is open or shorted, Turn Signal/Multifunction Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B3596 2018 Chevrolet Silverado indicates Hazard Lamps Request Circuit Malfunction.
- Common causes
- Common causes include Faulty Turn Signal/Multifunction Switch, Turn Signal/Multifunction Switch harness is open or shorted, Turn Signal/Multifunction Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B3596 2018 Chevrolet Silverado Description
What are the Possible Causes of the DTC B3596 2018 Chevrolet Silverado?
- Faulty Turn Signal/Multifunction Switch
- Turn Signal/Multifunction Switch harness is open or shorted
- Turn Signal/Multifunction Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B3596 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B3596 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B3596 2018 Chevrolet Silverado code?
Need more information on how to fix the B3596 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B3596 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B3596 2018 Chevrolet Silverado Code
What does the OBDII code B3596 mean for a 2018 Chevrolet Silverado?
The code B3596 indicates a malfunction in the Hazard Lamps Request Circuit, which controls the activation of the hazard lights.
What are the common symptoms of code B3596 in a 2018 Chevrolet Silverado?
Symptoms may include the hazard lamps not functioning, intermittent blinking, or failure to turn on when the hazard button is pressed.
What causes the Hazard Lamps Request Circuit Malfunction (B3596)?
Common causes include a faulty hazard switch, damaged wiring or connectors in the circuit, or a problem with the Body Control Module (BCM).
Can driving with code B3596 damage my 2018 Chevrolet Silverado?
While it may not cause immediate damage, the inability to use hazard lights can be a safety concern in emergency situations.
How can I diagnose code B3596 in my 2018 Chevrolet Silverado?
You can diagnose the issue by inspecting the hazard switch, checking for damaged wiring or loose connectors, and scanning the BCM for additional codes.
What tools do I need to troubleshoot the B3596 code?
You’ll need an OBDII scanner, a multimeter for testing electrical circuits, and possibly wiring diagrams specific to the hazard lamp circuit.
How do I fix code B3596 on a 2018 Chevrolet Silverado?
Repairs may include replacing the hazard switch, repairing damaged wiring or connectors, or reprogramming or replacing the BCM if necessary.
Can a dead battery cause the B3596 code to appear?
Yes, a weak or dead battery can sometimes trigger BCM-related codes, including B3596, due to low voltage or power fluctuations.
How much does it cost to repair code B3596 on a Chevy Silverado?
Costs vary depending on the issue, but replacing a hazard switch might cost $50-$150, while BCM repairs could exceed $300-$600.
Can I reset the B3596 code without repairing the issue?
You can clear the code with an OBDII scanner, but if the underlying issue isn’t resolved, the code will likely return.
Discuss the causes and fixes for B3596 2018 Chevrolet Silverado OBDII Code
Code B3596 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
