AutoCodesBuick – B3583 Buick

B3583 Buick Code - Output Air Temperature Sensor 7 Circuit

Quick Answer

Air temperature sensors allow the Heating, Ventilation, and Air Conditioning (HVAC) Control Module to monitor the temperature of the discharge air in the HVAC ducts. Common causes include Faulty Output Air Temperature Sensor 7, Output Air Temperature Sensor 7 harness is open or shorted, Output Air Temperature Sensor 7 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B3583 Buick indicates Output Air Temperature Sensor 7 Circuit.
Common causes
Common causes include Faulty Output Air Temperature Sensor 7, Output Air Temperature Sensor 7 harness is open or shorted, Output Air Temperature Sensor 7 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 930
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 09, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3583 Buick Description

Air temperature sensors allow the Heating, Ventilation, and Air Conditioning (HVAC) Control Module to monitor the temperature of the discharge air in the HVAC ducts. The module applies 5 volts to internal input resistors that are connected to the signal circuits of the air temperature sensors. The module provides ground to the air temperature sensors through the low reference circuit. The HVAC control module monitors the voltage drops across the air temperature sensors and uses the inputs for automatic control calculations. When the duct air temperatures are cold, the resistances of the sensors are high and the voltage signals are high. When the duct air temperatures are hot, the resistances of the sensors are low and the voltage signals are low. The HVAC control module converts the voltage values to count values where 1 volt is approximately equal to 51 counts.
OBDII Code B3583 Buick - Output Air Temperature Sensor 7 Circuit - AutoCodes.com
B3583 Buick Code - Output Air Temperature Sensor 7 Circuit

What are the Possible Causes of the DTC B3583 Buick?

  • Faulty Output Air Temperature Sensor 7
  • Output Air Temperature Sensor 7 harness is open or shorted
  • Output Air Temperature Sensor 7 circuit poor electrical connection
  • Faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module

How to Fix the DTC B3583 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3583 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3583 Buick code?

Need more information on how to fix the B3583 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3583 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3583 Buick Code

1. What does the OBDII code B3583 mean on a Buick?

The B3583 code indicates an issue with the Output Air Temperature Sensor 7 Circuit, which monitors temperature for a specific climate control zone.

2. What are common symptoms of the B3583 code?

Symptoms may include improper climate control operation, inconsistent cabin temperature, or an unresponsive HVAC system.

3. What causes the B3583 code to appear?

Common causes include a faulty Output Air Temperature Sensor, damaged wiring or connectors, or a malfunctioning HVAC control module.

4. Can I continue driving with the B3583 code active?

Yes, but climate control functionality may be compromised, potentially affecting cabin comfort.

5. How do I diagnose the B3583 code on my Buick?

Check the sensor and circuit for visible damage, use a multimeter to test wiring continuity, and scan the HVAC system for additional codes.

6. How do I fix the B3583 code?

Repairs may involve replacing the faulty air temperature sensor, repairing damaged wiring, or reprogramming the HVAC control module.

7. Where is the Output Air Temperature Sensor 7 located?

The sensor’s location depends on your Buick model, but it’s typically found within the HVAC system, near the vents or air ducts.

8. How much does it cost to repair the B3583 code?

Repair costs vary but usually range from $100 to $300, depending on whether the issue is with the sensor, wiring, or control module.

9. Can a weak battery cause the B3583 code?

A weak battery is unlikely to cause this specific code, but low voltage could contribute to system miscommunication.

10. Is it necessary to clear the B3583 code after repairs?

Yes, after making repairs, clear the code using an OBDII scanner and test the system to ensure the issue is resolved.

Discuss the causes and fixes for B3583 Buick OBDII Code

Code B3583 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play