AutoCodes – GMC – B3106 2014 GMC Sierra

B3106 2014 GMC Sierra Code - Keyless Entry Data Link

Quick Answer

The Body Control Module (BCM) communicates with the Remote Control Door Lock Receiver (RCDLR) through the keyless entry serial data circuits. Common causes include Faulty Remote Control Door Lock Receiver (RCDLR), Remote Control Door Lock Receiver harness is open or shorted, Remote Control Door Lock Receiver circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3106 2014 GMC Sierra indicates Keyless Entry Data Link.
Common causes: Common causes include Faulty Remote Control Door Lock Receiver (RCDLR), Remote Control Door Lock Receiver harness is open or shorted, Remote Control Door Lock Receiver circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 174

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 11, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3106 2014 GMC Sierra Description

The Body Control Module (BCM) communicates with the Remote Control Door Lock Receiver (RCDLR) through the keyless entry serial data circuits. When any button on the keyless entry transmitter is pressed, the transmitter sends a signal to the RCDLR. The RCDLR sends a function request to the body control module, depending on which button is pressed on the transmitter. The BCM receives the message and performs the appropriate function. The Diagnostic Trouble Code (DTC) will be set when the transmitter that is sending a signal to the RCDLR is different from those transmitters stored in the BCM.

OBDII Code B3106 2014 GMC Sierra - Keyless Entry Data Link - AutoCodes.com — B3106 2014 GMC Sierra Code - Keyless Entry Data Link

What does this mean?

What are the Possible Causes of the DTC B3106 2014 GMC Sierra?

Faulty Remote Control Door Lock Receiver (RCDLR)
Remote Control Door Lock Receiver harness is open or shorted
Remote Control Door Lock Receiver circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B3106 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3106 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3106 2014 GMC Sierra code?

Need more information on how to fix the B3106 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3106 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3106 2014 GMC Sierra Code

1. What does OBDII code B3106 for a 2014 GMC Sierra related to Keyless Entry Data Link indicate?

This code typically points to a fault in the keyless entry system's data link communication.

2. What are the common symptoms of OBDII code B3106 in a 2014 GMC Sierra?

Common symptoms include the keyless entry system not functioning properly, intermittent remote keyless entry operation, or the inability to lock or unlock the vehicle using the remote.

3. What are the possible causes of OBDII code B3106 in a 2014 GMC Sierra?

Potential causes can include a faulty key fob, damaged wiring in the keyless entry system, a malfunctioning receiver module, or an issue with the vehicle's body control module.

4. How can I diagnose the source of OBDII code B3106 in my 2014 GMC Sierra?

To pinpoint the issue, start by checking the key fob battery, inspecting the wiring for any visible damage, and using a diagnostic scan tool to read live data from the keyless entry system components.

5. Can OBDII code B3106 be repaired at home, or do I need to take my 2014 GMC Sierra to a mechanic?

Simple fixes like replacing the key fob battery or repairing damaged wiring can often be done at home. However, complex issues with modules or system components may require professional diagnosis and repair.

6. Are there any quick tips for resolving OBDII code B3106 in a 2014 GMC Sierra?

Try reprogramming the key fob, ensuring all doors are properly closed, and checking for any loose connections in the keyless entry system to see if the issue resolves.

7. Will OBDII code B3106 cause any safety concerns while driving my 2014 GMC Sierra?

This code is related to the keyless entry system and should not impact the vehicle's drivability or safety while on the road.

8. How long does it typically take to fix OBDII code B3106 in a 2014 GMC Sierra?

The repair time can vary based on the specific cause of the issue. Simple fixes like replacing the key fob battery may take only a few minutes, while more complex repairs could require several hours.

9. What should I do if I continue to experience problems with the keyless entry system after resolving OBDII code B3106 in my 2014 GMC Sierra?

If issues persist, it's recommended to have the vehicle further inspected by a professional technician to identify any underlying problems or additional faults within the system.

10. Is there a way to prevent OBDII code B3106 from reoccurring in my 2014 GMC Sierra?

Regularly maintaining the keyless entry system, keeping the key fob in good condition, and addressing any warning signs promptly can help prevent the recurrence of this code.