AutoCodes – GMC – B3060 2017 GMC Sierra

B3060 2017 GMC Sierra Code - Unprogrammed Transponder Identification Code Received Malfunction

Quick Answer

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3060 2017 GMC Sierra indicates Unprogrammed Transponder Identification Code Received Malfunction.
Common causes: Common causes include Faulty Key, Faulty Immobilizer Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 206

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3060 2017 GMC Sierra Description

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. The transponder transmits a signal to the immobilizer control module. The immobilizer control module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the transponder value measured by the BCM is incorrect or not learned to the vehicle.

OBDII Code B3060 2017 GMC Sierra - Unprogrammed Transponder Identification Code Received Malfunction - AutoCodes.com — B3060 2017 GMC Sierra Code - Unprogrammed Transponder Identification Code Received Malfunction

What does this mean?

What are the Possible Causes of the DTC B3060 2017 GMC Sierra?

Faulty Key
Faulty Immobilizer Control Module

How to Fix the DTC B3060 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3060 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3060 2017 GMC Sierra code?

Need more information on how to fix the B3060 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3060 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3060 2017 GMC Sierra Code

1. What are the common symptoms of OBDII code B3060 in a 2017 GMC Sierra?

The common symptoms of OBDII code B3060, Unprogrammed Transponder Identification Code Received Malfunction, in a 2017 GMC Sierra may include issues with starting the vehicle and the security light staying on.

2. What can cause the OBDII code B3060 in a 2017 GMC Sierra?

The OBDII code B3060 in a 2017 GMC Sierra can be caused by a faulty transponder key, issues with the transponder antenna, or a problem with the vehicle's immobilizer system.

3. How can I diagnose the OBDII code B3060 in my 2017 GMC Sierra?

Diagnosing the OBDII code B3060 in a 2017 GMC Sierra typically involves using a scan tool to retrieve the code, checking the transponder key for proper programming, inspecting the transponder antenna, and testing the immobilizer system.

4. What are some possible repair tips for OBDII code B3060 in a 2017 GMC Sierra?

Repair tips for OBDII code B3060 in a 2017 GMC Sierra may include reprogramming the transponder key, repairing or replacing the transponder antenna, or resetting the vehicle's immobilizer system.

5. Can I fix the OBDII code B3060 in my 2017 GMC Sierra myself?

While some simple repairs like reprogramming the transponder key can be done by DIY enthusiasts, diagnosing and repairing complex issues related to OBDII code B3060 may require professional assistance from a qualified mechanic.

6. Is it safe to continue driving my 2017 GMC Sierra with the OBDII code B3060 present?

It is not recommended to continue driving your 2017 GMC Sierra with the OBDII code B3060 present, as it can lead to potential issues with starting the vehicle and may compromise its security system.

7. How much does it typically cost to repair the OBDII code B3060 in a 2017 GMC Sierra?

The cost of repairing the OBDII code B3060 in a 2017 GMC Sierra can vary depending on the underlying cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Can a low battery cause the OBDII code B3060 to trigger in a 2017 GMC Sierra?

Yes, a low battery in the transponder key or the vehicle itself can potentially cause the OBDII code B3060 to trigger in a 2017 GMC Sierra. Ensuring the battery is in good condition is recommended as part of troubleshooting this code.

9. Will disconnecting the battery reset the OBDII code B3060 in my 2017 GMC Sierra?

Disconnecting the battery may temporarily reset the OBDII code B3060 in a 2017 GMC Sierra, but if the underlying issue causing the code is not repaired, it is likely to reappear once the system detects the problem again.

10. How can I prevent the OBDII code B3060 from occurring in my 2017 GMC Sierra in the future?

To prevent the OBDII code B3060 from occurring in your 2017 GMC Sierra in the future, it's important to ensure your transponder key is properly programmed, regularly check the condition of the key and its battery, and address any immobilizer system issues promptly.