AutoCodes – GMC – B3060 2015 GMC Sierra

B3060 2015 GMC Sierra Code - Unprogrammed Transponder Identification Code Received Malfunction

Quick Answer

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3060 2015 GMC Sierra indicates Unprogrammed Transponder Identification Code Received Malfunction.
Common causes: Common causes include Faulty Key, Faulty Immobilizer Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 178

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3060 2015 GMC Sierra Description

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. The transponder transmits a signal to the immobilizer control module. The immobilizer control module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the transponder value measured by the BCM is incorrect or not learned to the vehicle.

OBDII Code B3060 2015 GMC Sierra - Unprogrammed Transponder Identification Code Received Malfunction - AutoCodes.com — B3060 2015 GMC Sierra Code - Unprogrammed Transponder Identification Code Received Malfunction

What does this mean?

What are the Possible Causes of the DTC B3060 2015 GMC Sierra?

Faulty Key
Faulty Immobilizer Control Module

How to Fix the DTC B3060 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3060 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3060 2015 GMC Sierra code?

Need more information on how to fix the B3060 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3060 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3060 2015 GMC Sierra Code

1. What are the common symptoms of OBDII code B3060 in a 2015 GMC Sierra?

The common symptoms of OBDII code B3060 ("Unprogrammed Transponder Identification Code Received Malfunction") in a 2015 GMC Sierra may include issues with starting the vehicle, intermittent stalling, or problems with the vehicle's anti-theft system.

2. What can cause the B3060 code to trigger in a 2015 GMC Sierra?

The B3060 code in a 2015 GMC Sierra can be triggered by a variety of issues, such as a faulty transponder key, problems with the vehicle's immobilizer system, or issues with the keyless entry system.

3. How can I diagnose the B3060 code in my 2015 GMC Sierra?

Diagnosing the B3060 code in a 2015 GMC Sierra typically involves using a diagnostic scanner to retrieve the trouble codes, checking the transponder key for proper programming, and inspecting the vehicle's immobilizer system for any faults.

4. Can I still drive my 2015 GMC Sierra with the B3060 code present?

In some cases, you may still be able to drive your 2015 GMC Sierra with the B3060 code present, but it is recommended to address the issue promptly to avoid potential starting or security system problems.

5. How can I repair the B3060 code in my 2015 GMC Sierra?

Repairing the B3060 code in a 2015 GMC Sierra may involve reprogramming the transponder key, resetting the vehicle's immobilizer system, or replacing a faulty key or keyless entry component.

6. Is it safe to reset the B3060 code in my 2015 GMC Sierra using a diagnostic scanner?

Yes, it is generally safe to reset the B3060 code using a diagnostic scanner, but it is crucial to address the underlying cause of the code to prevent it from reoccurring.

7. Can a DIY enthusiast fix the B3060 code in a 2015 GMC Sierra?

While some DIY enthusiasts may be able to address the B3060 code in a 2015 GMC Sierra, it is recommended to consult a professional mechanic for a proper diagnosis and repair to ensure the issue is resolved correctly.

8. Will the B3060 code cause my 2015 GMC Sierra to fail an emissions test?

The B3060 code itself is not directly related to emissions, so it may not cause your 2015 GMC Sierra to fail an emissions test. However, it is essential to address the code to prevent potential starting or security issues.

9. How much does it cost to repair the B3060 code in a 2015 GMC Sierra?

The cost of repairing the B3060 code in a 2015 GMC Sierra can vary depending on the underlying cause of the issue, the needed repairs or parts, and labor costs. It is recommended to obtain quotes from reputable mechanics for an accurate estimate.

10. Can the B3060 code in a 2015 GMC Sierra be prevented?

Preventing the B3060 code in a 2015 GMC Sierra involves proper maintenance of the vehicle's keyless entry system, regular inspection of the transponder key, and addressing any starting or security system issues promptly to avoid triggering the code.