AutoCodesGMC – B3055 2014 GMC Sierra

B3055 2014 GMC Sierra Code - No Transponder Modulation or No Transponder

Quick Answer

When a keyless entry transmitter is inserted into the transmitter pocket/slot and the ignition mode switch is pressed, the transponder embedded in the transmitter is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B3055 2014 GMC Sierra indicates No Transponder Modulation or No Transponder.
Common causes
Common causes include Faulty Key, Faulty Immobilizer Control Module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 217
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 08, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3055 2014 GMC Sierra Description

When a keyless entry transmitter is inserted into the transmitter pocket/slot and the ignition mode switch is pressed, the transponder embedded in the transmitter is energized by the immobilizer antenna exciter coil. The transponder transmits a signal to the immobilizer control module. The immobilizer control module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the BCM is unable to measure the ignition key/transmitter transponder value.
OBDII Code B3055 2014 GMC Sierra - No Transponder Modulation or No Transponder - AutoCodes.com
B3055 2014 GMC Sierra Code - No Transponder Modulation or No Transponder

What are the Possible Causes of the DTC B3055 2014 GMC Sierra?

  • Faulty Key
  • Faulty Immobilizer Control Module

How to Fix the DTC B3055 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3055 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3055 2014 GMC Sierra code?

Need more information on how to fix the B3055 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3055 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3055 2014 GMC Sierra Code

1. What does the OBDII code B3055 mean on a 2014 GMC Sierra?

B3055 indicates a "No Transponder Modulation" or "No Transponder" issue, meaning the vehicle's theft deterrent system is unable to detect or communicate with the key's transponder.

2. What are common symptoms of the B3055 code on a 2014 GMC Sierra?

Common symptoms include the engine failing to start, the security light staying illuminated or flashing, and the inability to communicate with the key's transponder.

3. What causes the B3055 code to appear on a 2014 GMC Sierra?

The most common causes include a faulty transponder key, a damaged or malfunctioning ignition lock cylinder, a defective theft deterrent control module, or wiring and communication issues.

4. How can I fix the B3055 code on my 2014 GMC Sierra?

Check the key for damage, ensure the ignition lock cylinder is functional, inspect wiring for damage, and test the theft deterrent control module. Reprogramming or replacing the key may also be necessary.

5. Can a dead key fob battery cause the B3055 code on a 2014 GMC Sierra?

No, the B3055 code is related to the transponder chip in the key, which does not rely on the fob battery. However, a damaged key fob or chip could trigger this code.

6. How do I know if the transponder key is faulty for code B3055?

If the key is visibly damaged, fails to start the vehicle, and another programmed key works, the transponder key may be faulty and require replacement or reprogramming.

7. Can I drive my 2014 GMC Sierra with the B3055 code?

No, this code typically prevents the engine from starting due to the theft deterrent system's failure to recognize the key, so the vehicle will not be drivable.

8. Does the B3055 code always mean I need a new key?

Not necessarily. The issue could be with the ignition cylinder, wiring, or theft deterrent module rather than the key itself. Proper diagnosis is essential.

9. What tools are needed to diagnose the B3055 code on a 2014 GMC Sierra?

You’ll need an OBDII scanner capable of reading body and theft deterrent system codes, as well as a multimeter to check wiring and connections.

10. Can a locksmith fix the B3055 code on a 2014 GMC Sierra?

Yes, a qualified automotive locksmith can often diagnose and address key or transponder issues, including reprogramming or replacing a faulty key.

Discuss the causes and fixes for B3055 2014 GMC Sierra OBDII Code

Code B3055 2014 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play