AutoCodes – Buick – B3031 Buick

B3031 Buick Code - Security System Controller In Learn Mode

Quick Answer

When learning a coded key, the Body Control Module (BCM) is placed in learn mode. Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3031 Buick indicates Security System Controller In Learn Mode.
Common causes: Common causes include Faulty Body Control Module (BCM), Body Control Module harness is open or shorted, Body Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,283

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 02, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3031 Buick Description

When learning a coded key, the Body Control Module (BCM) is placed in learn mode. Diagnostic Trouble Code (DTC) B3031 will be set automatically as an indicator that the system is in learning mode and not as a fault indicator. On some model-year vehicles, the instructions for adding keys includes the direction to always use two learned keys. This DTC will be set if that direction is not followed. If only one learned key is available, then Replacing Keys must be performed. Once the coded key is learned, learn mode will be exited and the DTC cleared. If the BCM does not exit learn mode, DTC B3031 will remain current and indicate a fault. The instrument cluster security indicator will illuminate, and the driver information center will display a message.

OBDII Code B3031 Buick - Security System Controller In Learn Mode - AutoCodes.com — B3031 Buick Code - Security System Controller In Learn Mode

What does this mean?

What are the Possible Causes of the DTC B3031 Buick?

Faulty Body Control Module (BCM)
Body Control Module harness is open or shorted
Body Control Module circuit poor electrical connection

How to Fix the DTC B3031 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3031 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3031 Buick code?

Need more information on how to fix the B3031 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3031 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.