B2957 Ford Code - Blend Door Open Circuit Failure Or Short
Quick Answer
Under normal operation, to rotate the mode door actuator clockwise, the Electric Manual Temperature Control (EMTC) module or Electronic Automatic Temperature Control (EATC) module supplies voltage to the Blend, Floor/Defrost and Panel mode door actuator motors through the door actuator feed B circuits, and supplies ground through the door actuator feed A circuits. Common causes include Faulty Blend Door Actuator Motor, Blend Door Actuator Motor harness is open or shorted, Blend Door Actuator Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2957 Ford indicates Blend Door Open Circuit Failure Or Short.
- Common causes
- Common causes include Faulty Blend Door Actuator Motor, Blend Door Actuator Motor harness is open or shorted, Blend Door Actuator Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2957 Ford Description
The mode door actuator feedback resistors are supplied a ground from the EMTC module or EATC module by the mode door actuator return circuits and a 5-volt reference voltage on the mode door actuator reference circuits. The EMTC module or EATC module reads the voltage on the mode door actuator feedback circuits to determine the mode door actuator position by the position of the actuator feedback resistor wiper arm.
What are the Possible Causes of the DTC B2957 Ford?
- Faulty Blend Door Actuator Motor
- Blend Door Actuator Motor harness is open or shorted
- Blend Door Actuator Motor circuit poor electrical connection
- Faulty Electric Manual Temperature Control (EMTC) Module or Electronic Automatic Temperature Control (EATC) Module
How to Fix the DTC B2957 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2957 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2957 Ford code?
Need more information on how to fix the B2957 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2957 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2957 Ford Code
1. What are the common symptoms of OBDII code B2957 Ford (Blend Door Open Circuit Failure Or Short)?
The common symptoms include issues with the heating or cooling system not functioning properly, inconsistent temperature control inside the vehicle, or unusual clicking or tapping sounds from the dashboard.
2. What are the possible causes of OBDII code B2957 Ford?
The code B2957 typically indicates a fault with the blend door actuator, a wiring issue, a faulty blend door, or a problem with the HVAC control module.
3. How can I diagnose the OBDII code B2957 Ford?
Diagnosing the code involves using a scan tool to retrieve the specific code, checking the blend door actuator for proper operation, inspecting the wiring for any damage or loose connections, and testing the blend door itself for functionality.
4. What are some repair tips for fixing OBDII code B2957 Ford?
Repair tips may include replacing the blend door actuator if faulty, repairing any damaged wiring, ensuring proper connection of electrical components, and recalibrating the HVAC system after repairs are made.
5. Can I drive my vehicle with OBDII code B2957 Ford present?
It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to avoid potential discomfort due to heating or cooling system malfunctions.
6. How much does it cost to repair OBDII code B2957 Ford?
The cost of repairs can vary depending on the specific cause of the code and whether professional assistance is required. Costs may include parts and labor for replacement components or wiring repairs.
7. Can I reset the OBDII code B2957 Ford on my own?
You can attempt to reset the code by disconnecting the vehicle's battery for a few minutes, but it is important to diagnose and address the underlying issue to prevent the code from reappearing.
8. Is OBDII code B2957 Ford a common issue in Ford vehicles?
The blend door open circuit failure or short (B2957) is a relatively common issue in Ford vehicles, particularly in models with HVAC systems that rely on blend door actuators for temperature control.
9. How long does it take to repair OBDII code B2957 Ford?
The repair time can vary depending on the complexity of the issue and the specific components that need to be addressed. Simple repairs may take a few hours, while more involved repairs could take longer.
10. Are there any preventive measures to avoid OBDII code B2957 Ford in the future?
Regular maintenance of the HVAC system, checking for unusual sounds or temperature fluctuations, and addressing any issues promptly can help prevent the occurrence of OBDII code B2957 in the future.
Discuss the causes and fixes for B2957 Ford OBDII Code
Code B2957 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
