AutoCodesRAM – B2818 RAM

B2818 RAM Code - Headlamp Leveling Sensor Supply Circuit High

Quick Answer

The Diagnostic Trouble Code (DTC) sets when the Headlamp Leveling Module (HIDT) detects a high condition on the output circuit. Common causes include Faulty Headlamp Leveling Switch, Headlamp Leveling Switch harness is open or shorted, Headlamp Leveling Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2818 RAM indicates Headlamp Leveling Sensor Supply Circuit High.
Common causes
Common causes include Faulty Headlamp Leveling Switch, Headlamp Leveling Switch harness is open or shorted, Headlamp Leveling Switch circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 415
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 13, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2818 RAM Description

The Diagnostic Trouble Code (DTC) sets when the Headlamp Leveling Module (HIDT) detects a high condition on the output circuit.
OBDII Code B2818 RAM - Headlamp Leveling Sensor Supply Circuit High - AutoCodes.com
B2818 RAM Code - Headlamp Leveling Sensor Supply Circuit High

What are the Possible Causes of the DTC B2818 RAM?

  • Faulty Headlamp Leveling Switch
  • Headlamp Leveling Switch harness is open or shorted
  • Headlamp Leveling Switch circuit poor electrical connection
  • Faulty Headlamp Leveling Module (HIDT)

How to Fix the DTC B2818 RAM?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2818 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2818 RAM code?

Need more information on how to fix the B2818 RAM code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2818 RAM code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2818 RAM Code

1. What does the OBDII code B2818 on a RAM vehicle indicate?

The code B2818 refers to a "Headlamp Leveling Sensor Supply Circuit High," meaning there’s an issue with the electrical supply to the headlamp leveling sensor.

2. What are common symptoms of code B2818 in a RAM vehicle?

Symptoms include malfunctioning or misaligned headlamp leveling, warning lights on the dashboard, and reduced visibility during nighttime driving.

3. What causes the B2818 code to appear?

Common causes include a faulty headlamp leveling sensor, damaged wiring or connectors, or a malfunctioning control module.

4. Can a dead battery trigger the B2818 code?

Yes, a weak or dead battery can cause voltage irregularities that may trigger this code.

5. How can I diagnose the B2818 code on my RAM vehicle?

Inspect the headlamp leveling sensor, check for damaged wiring or connectors, and use a diagnostic scanner to confirm the issue.

6. How do I fix the B2818 code?

Repairs may involve replacing the headlamp leveling sensor, repairing damaged wiring, or recalibrating the control module.

7. Can I still drive my RAM vehicle with the B2818 code?

Yes, but driving with malfunctioning headlamp leveling can reduce visibility, especially at night, and should be addressed promptly.

8. How much does it cost to fix the B2818 code?

Repair costs vary, but sensor replacement typically ranges from $150 to $300, excluding labor.

9. Can I clear the B2818 code without fixing the issue?

Clearing the code without repairs may remove the warning temporarily, but the issue will likely recur until addressed.

10. Does the B2818 code affect other vehicle systems?

While primarily affecting headlamp leveling, prolonged issues could strain the electrical system or cause further diagnostic errors.

Discuss the causes and fixes for B2818 RAM OBDII Code

Code B2818 RAM comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play