B2815 GMC Code - Steering Wheel Controls Illegal Resistance Value
Quick Answer
The Steering Wheel Controls are momentary contact switches that connect a series of resistors so that each switch selection corresponds to a fixed resistance value. Common causes include Faulty Steering Wheel Control (SWC) Switch, Steering Wheel Control (SWC) Switch harness is open or shorted, Steering Wheel Control (SWC) Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2815 GMC indicates Steering Wheel Controls Illegal Resistance Value.
- Common causes
- Common causes include Faulty Steering Wheel Control (SWC) Switch, Steering Wheel Control (SWC) Switch harness is open or shorted, Steering Wheel Control (SWC) Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2815 GMC Description
What are the Possible Causes of the DTC B2815 GMC?
- Faulty Steering Wheel Control (SWC) Switch
- Steering Wheel Control (SWC) Switch harness is open or shorted
- Steering Wheel Control (SWC) Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2815 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2815 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2815 GMC code?
Need more information on how to fix the B2815 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2815 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2815 GMC Code
1. What are the common symptoms of OBDII code B2815 GMC related to steering wheel controls illegal resistance value?
- The common symptoms include inoperative steering wheel controls, malfunctioning audio system controls, and illuminated warning lights on the dashboard.
2. What causes the OBDII code B2815 GMC to appear?
- This code is typically triggered when the resistance value of the steering wheel controls deviates from the expected range, often due to a faulty wiring connection or a defective control module.
3. How can I diagnose the issue causing the OBDII code B2815 GMC?
- To diagnose the issue, you can perform a thorough inspection of the wiring harness connected to the steering wheel controls, check for any loose or damaged connections, and use a multimeter to measure the resistance values.
4. Is it safe to continue driving with the OBDII code B2815 GMC present?
- It is not recommended to continue driving with this code present, as it can lead to a loss of functionality in the steering wheel controls, potentially affecting the driver's ability to operate certain vehicle functions safely.
5. Can I repair the OBDII code B2815 GMC issue myself?
- Depending on your level of automotive expertise, you may be able to repair the issue yourself by inspecting the wiring connections, repairing any damaged wires, and resetting the control module. However, seeking professional assistance is advisable for accurate diagnosis and repair.
6. How much does it typically cost to fix the OBDII code B2815 GMC issue?
- The cost of fixing this issue can vary depending on the underlying cause and the extent of the repairs needed. It is recommended to consult a mechanic or dealership for an accurate cost estimate.
7. Will resetting the OBDII code B2815 GMC make the issue go away permanently?
- Resetting the code may temporarily clear the warning light, but if the root cause of the problem is not addressed (such as fixing wiring issues or replacing faulty components), the code is likely to reappear.
8. Are there any preventive measures to avoid encountering the OBDII code B2815 GMC in the future?
- Regularly inspecting and maintaining the steering wheel controls, checking the wiring connections for any signs of wear or damage, and addressing any issues promptly can help prevent the recurrence of this OBDII code.
9. Can extreme weather conditions impact the appearance of the OBDII code B2815 GMC?
- Extreme weather conditions, such as temperature fluctuations or moisture exposure, can potentially affect the resistance values in the steering wheel controls, leading to the triggering of this OBDII code.
10. How urgent is it to address the OBDII code B2815 GMC once it appears?
- It is advisable to address the OBDII code B2815 GMC as soon as possible to prevent any further deterioration in the functionality of the steering wheel controls and ensure the safe operation of the vehicle.
Discuss the causes and fixes for B2815 GMC OBDII Code
Code B2815 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
