AutoCodes – Subaru – B2810 Subaru

B2810 Subaru Code - Incompatible With EyeSight

Quick Answer

The Diagnostic Trouble Code (DTC) sets when the combination meter, which is not designed exclusively for EyeSight is installed. Common causes include Faulty Combination Meter, Combination Meter harness is open or shorted, Combination Meter circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2810 Subaru indicates Incompatible With EyeSight.
Common causes: Common causes include Faulty Combination Meter, Combination Meter harness is open or shorted, Combination Meter circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,743

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 11, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2810 Subaru Description

The Diagnostic Trouble Code (DTC) sets when the combination meter, which is not designed exclusively for EyeSight is installed.

OBDII Code B2810 Subaru - Incompatible With EyeSight - AutoCodes.com — B2810 Subaru Code - Incompatible With EyeSight

What does this mean?

What are the Possible Causes of the DTC B2810 Subaru?

Faulty Combination Meter
Combination Meter harness is open or shorted
Combination Meter circuit poor electrical connection

How to Fix the DTC B2810 Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2810 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2810 Subaru code?

Need more information on how to fix the B2810 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2810 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2810 Subaru Code

1. What does OBDII code B2810 Subaru "Incompatible With EyeSight" mean?

The code B2810 indicates that the vehicle's EyeSight system is not compatible with the current configuration, possibly due to a software or hardware issue.

2. What are the common symptoms of OBDII code B2810 in a Subaru vehicle?

Common symptoms include a warning light on the dashboard related to the EyeSight system, reduced functionality or complete shutdown of EyeSight features, and error messages on the display screen.

3. What can cause the OBDII code B2810 to appear in a Subaru?

The code B2810 can be triggered by a software glitch, a faulty sensor or camera related to the EyeSight system, a wiring issue, or a compatibility problem with aftermarket modifications.

4. How can I diagnose the OBDII code B2810 in my Subaru?

Diagnosing the code B2810 typically involves using an OBDII scanner to retrieve the code, checking for any related error messages in the vehicle's system, and inspecting the EyeSight components for any visible damage.

5. What are the potential repair options for OBDII code B2810 in a Subaru?

Repair options may include updating the software of the EyeSight system, replacing a faulty sensor or camera, repairing any damaged wiring, or restoring the vehicle to its original configuration if aftermarket modifications are causing the issue.

6. Can I continue driving my Subaru with the OBDII code B2810 present?

It is not recommended to ignore the code B2810, as it indicates a problem with the vehicle's EyeSight system, which is designed to enhance safety features. It is best to address the issue promptly to ensure the proper functioning of the system.

7. How much does it typically cost to repair OBDII code B2810 in a Subaru?

The cost of repairing the code B2810 can vary depending on the underlying cause of the issue. It is advisable to consult with a qualified mechanic or dealership to get an accurate estimate for the repair.

8. Can I reset the OBDII code B2810 in my Subaru without fixing the issue?

While you can clear the code using an OBDII scanner, it is essential to address the root cause of the problem to prevent the code from reappearing and ensure the proper functioning of the EyeSight system.

9. Will the OBDII code B2810 in my Subaru affect the vehicle's overall performance?

While the code B2810 may not directly impact the performance of the vehicle, it can affect the functionality of the EyeSight system, which plays a crucial role in enhancing safety features and driver assistance technologies.

10. How can I prevent the OBDII code B2810 from appearing in my Subaru?

To prevent the code B2810 from appearing, it is essential to follow the manufacturer's guidelines for maintenance and software updates related to the EyeSight system, avoid aftermarket modifications that may cause compatibility issues, and address any warning lights or error messages promptly.