AutoCodes – Dodge – B2768 Dodge

B2768 Dodge Code - Right Impact Pressure Sensor

Quick Answer

The right side impact pressure sensor 4 is located in the first row door. Common causes include Faulty Right Impact Pressure Sensor, Right Impact Pressure Sensor harness is open or shorted, Right Impact Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2768 Dodge indicates Right Impact Pressure Sensor.
Common causes: Common causes include Faulty Right Impact Pressure Sensor, Right Impact Pressure Sensor harness is open or shorted, Right Impact Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,446

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 27, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2768 Dodge Description

The right side impact pressure sensor 4 is located in the first row door. The impact pressure sensors perform their own self test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. The repair of this fault condition involves verifying the integrity of the wiring between the ORC and the sensor. The ORC continuously communicates with the Right Side Impact (Pressure) Sensor 4 over the sensor signal circuit. The sensor communication and on board diagnostics are powered by the ORC signal.
This code will set, if the ORC and the Right Side Impact (Pressure) Sensor 4 do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become Active after the fault has set for 9 seconds. The DTC will go to Stored after the ORC to Right Side Impact (Pressure) Sensor 4 communication has recovered for 4 seconds.

OBDII Code B2768 Dodge - Right Impact Pressure Sensor - AutoCodes.com — B2768 Dodge Code - Right Impact Pressure Sensor

What does this mean?

What are the Possible Causes of the DTC B2768 Dodge?

Faulty Right Impact Pressure Sensor
Right Impact Pressure Sensor harness is open or shorted
Right Impact Pressure Sensor circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B2768 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2768 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2768 Dodge code?

Need more information on how to fix the B2768 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2768 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2768 Dodge Code

1. What are the common symptoms of OBDII code B2768 in a Dodge related to the Right Impact Pressure Sensor?

The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system's functionality.

2. What typically causes the OBDII code B2768 related to the Right Impact Pressure Sensor in a Dodge?

This code is often triggered by a malfunction or failure of the Right Impact Pressure Sensor itself, which can be caused by impact damage, wiring issues, or sensor failure.

3. How can I diagnose the OBDII code B2768 in my Dodge that is related to the Right Impact Pressure Sensor?

Diagnosis involves using an OBDII scanner to retrieve the specific code, inspecting the sensor and its wiring for any visible damage, and testing the sensor's functionality using a multimeter.

4. Can I continue to drive my Dodge with the OBDII code B2768 related to the Right Impact Pressure Sensor?

It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the airbag system, which may compromise safety in the event of an accident.

5. What are the repair options for fixing the OBDII code B2768 in a Dodge caused by the Right Impact Pressure Sensor?

Repair options may include replacing the Right Impact Pressure Sensor, repairing any damaged wiring, resetting the airbag system, and clearing the error code using an OBDII scanner.

6. Are there any DIY tips for addressing the OBDII code B2768 related to the Right Impact Pressure Sensor in my Dodge?

DIY tips may include checking the sensor's connections for tightness, inspecting the wiring for any visible damage, and ensuring the sensor is securely mounted in place.

7. How important is it to address the OBDII code B2768 related to the Right Impact Pressure Sensor promptly?

It is crucial to address this code promptly, as it directly relates to the proper functioning of the airbag system, which is a critical safety feature in the event of a collision.

8. Can a mechanic help me reset the OBDII code B2768 in my Dodge related to the Right Impact Pressure Sensor?

Yes, a qualified mechanic can reset the error code using an OBDII scanner after addressing the underlying issue with the Right Impact Pressure Sensor.

9. How much does it typically cost to repair the OBDII code B2768 caused by the Right Impact Pressure Sensor in a Dodge?

The cost of repair can vary depending on the exact cause of the issue, but it may involve parts and labor costs ranging from $100 to $300 or more.

10. Is it necessary to have the airbag system inspected by a professional after repairing the OBDII code B2768 related to the Right Impact Pressure Sensor in my Dodge?

Yes, it is recommended to have the airbag system inspected and tested by a professional to ensure that it functions correctly and safely after addressing the code.