B2736 RAM Code - Left Pedestrian Satellite Acceleration Sensor
Quick Answer
The Pedestrian Protection Satellite Sensors perform internal self-tests and communicate the sensors status using power supplied by the Occupant Restraint Controller (ORC). Common causes include Faulty Left Pedestrian Satellite Acceleration Sensor, Left Pedestrian Satellite Acceleration Sensor harness is open or shorted, Left Pedestrian Satellite Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2736 RAM indicates Left Pedestrian Satellite Acceleration Sensor.
- Common causes
- Common causes include Faulty Left Pedestrian Satellite Acceleration Sensor, Left Pedestrian Satellite Acceleration Sensor harness is open or shorted, Left Pedestrian Satellite Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2736 RAM Description
This DTC sets when the ORC receives notification of a self test failure within the impact sensor within 100 ms for continuous test and 1 second for startup test. Once set, this DTC is latched for the entire ignition cycle or until the clear faults scan tool command is used, depending on the specific condition that sets the DTC.
What are the Possible Causes of the DTC B2736 RAM?
- Faulty Left Pedestrian Satellite Acceleration Sensor
- Left Pedestrian Satellite Acceleration Sensor harness is open or shorted
- Left Pedestrian Satellite Acceleration Sensor circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2736 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B2736-78 LEFT PEDESTRIAN PROTECTION SATELLITE SENSOR ALIGNMENT OR ADJUSTMENT INCORRECT
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2736 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2736 RAM code?
Need more information on how to fix the B2736 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2736 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2736 RAM Code
1. What are the common symptoms of OBDII code B2736 RAM titled Left Pedestrian Satellite Acceleration Sensor?
- Common symptoms include the illumination of the Check Engine Light, poor vehicle performance, and potential issues with the vehicle's safety systems.
2. What does the OBDII code B2736 RAM indicate about the Left Pedestrian Satellite Acceleration Sensor?
- This code suggests a malfunction or fault in the left pedestrian satellite acceleration sensor, which is a component of the vehicle's safety system.
3. What are the possible causes of OBDII code B2736 RAM related to the Left Pedestrian Satellite Acceleration Sensor?
- Possible causes include sensor malfunction, wiring issues, damaged connectors, or problems with the sensor's calibration.
4. How can I diagnose the OBDII code B2736 RAM for the Left Pedestrian Satellite Acceleration Sensor?
- Diagnosis typically involves using a diagnostic scanner to read the code, checking the sensor's wiring and connections, and testing the sensor's functionality.
5. Can I still drive my vehicle with OBDII code B2736 RAM related to the Left Pedestrian Satellite Acceleration Sensor?
- It is not recommended to drive the vehicle with this code present, as it may affect the proper functioning of safety systems. Prompt attention and repair are advised.
6. Is it possible to reset the OBDII code B2736 RAM for the Left Pedestrian Satellite Acceleration Sensor?
- While you can clear the code with a diagnostic tool, it is important to address the underlying issue causing the fault to prevent the code from reoccurring.
7. How much does it typically cost to repair OBDII code B2736 RAM related to the Left Pedestrian Satellite Acceleration Sensor?
- The cost of repair can vary depending on the specific issue, but it may involve sensor replacement, wiring repairs, or recalibration, which can range from moderate to expensive.
8. Can a DIY enthusiast repair OBDII code B2736 RAM associated with the Left Pedestrian Satellite Acceleration Sensor?
- While some basic troubleshooting steps can be done by enthusiasts, diagnosing and repairing this code may require specialized tools and knowledge, making it challenging for DIY repairs.
9. Are there any recalls or technical service bulletins related to OBDII code B2736 RAM and the Left Pedestrian Satellite Acceleration Sensor?
- It's recommended to check with the vehicle manufacturer or a trusted mechanic for any related recalls or technical service bulletins that may provide additional information or solutions.
10. How can I prevent OBDII code B2736 RAM from occurring in the future for the Left Pedestrian Satellite Acceleration Sensor?
- Regular maintenance checks, prompt addressing of any warning lights, and avoiding rough driving conditions can help prevent issues with the left pedestrian satellite acceleration sensor and related codes.
Discuss the causes and fixes for B2736 RAM OBDII Code
Code B2736 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
