B2730 Ford Code - Back Over-Temp Detected
Quick Answer
The Seat Control Module E (SCME) monitors seat backrest temperature while it supplies voltage and ground to both blower motors. Common causes include Restricted Driver Seat Backrest Blower Motor Filter, Faulty Driver Seat Backrest Blower Motor, Driver Seat Backrest Blower Motor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2730 Ford indicates Back Over-Temp Detected.
- Common causes
- Common causes include Restricted Driver Seat Backrest Blower Motor Filter, Faulty Driver Seat Backrest Blower Motor, Driver Seat Backrest Blower Motor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2730 Ford Description
If the driver seat backrest blower motor temperature exceeds 70 ° C (158 ° F) in cool mode or 85 ° C (185 ° F) in heat mode for more than 4 seconds the SCME shuts down the driver seat system and sets this Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC B2730 Ford?
- Restricted Driver Seat Backrest Blower Motor Filter
- Faulty Driver Seat Backrest Blower Motor
- Driver Seat Backrest Blower Motor harness is open or shorted
- Driver Seat Backrest Blower Motor circuit poor electrical connection
- Faulty Seat Control Module E (SCME)
How to Fix the DTC B2730 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2730 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2730 Ford code?
Need more information on how to fix the B2730 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2730 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2730 Ford Code
1. What are the common symptoms of OBDII code B2730 Ford (Back Over-Temp Detected)?
- Common symptoms include engine overheating, illuminated warning light on the dashboard, and potential loss of engine power.
2. What are the possible causes of OBDII code B2730 Ford?
- Possible causes include a malfunctioning cooling system, faulty coolant temperature sensor, a stuck thermostat, or a problem with the engine's cooling fan.
3. How can I diagnose the issue related to OBDII code B2730 Ford?
- Diagnosis typically involves checking the coolant level, inspecting the cooling system components for leaks, testing the coolant temperature sensor, and ensuring proper operation of the thermostat and cooling fan.
4. What are some tips for repairing OBDII code B2730 Ford?
- Repair tips may include flushing and refilling the coolant, replacing a defective coolant temperature sensor, fixing any leaks in the cooling system, and ensuring the thermostat and cooling fan are functioning correctly.
5. Can driving with OBDII code B2730 Ford cause further damage to the vehicle?
- Continued driving with this code can lead to engine overheating, potential damage to engine components, and even engine failure. It is important to address the issue promptly.
6. How serious is OBDII code B2730 Ford?
- This code indicates a problem with the engine's cooling system, which can potentially lead to overheating and engine damage if not addressed promptly. It should be taken seriously and repaired as soon as possible.
7. Is it safe to continue driving my vehicle with OBDII code B2730 Ford?
- It is not recommended to continue driving the vehicle with this code as it can result in engine overheating and potential damage. It is best to address the issue before further driving.
8. How much does it typically cost to repair OBDII code B2730 Ford?
- The cost of repairs can vary depending on the specific issue causing the code. Costs may include parts and labor for replacing components such as the coolant temperature sensor, thermostat, or cooling system repairs.
9. Can I reset OBDII code B2730 Ford without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, it is not recommended to do so without addressing the root cause of the problem. The issue may persist and lead to further complications if not properly repaired.
10. What should I do if OBDII code B2730 Ford keeps coming back after repair?
- If the code keeps reappearing after repair, it may indicate that the underlying issue was not fully resolved. Recheck the cooling system components, sensor, and related parts to ensure the problem is properly fixed.
Discuss the causes and fixes for B2730 Ford OBDII Code
Code B2730 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
