AutoCodes – Chrysler – B2722 Chrysler

B2722 Chrysler Code - Occupant Restraint Controller Unlocked All Deployment Disabled

Quick Answer

All Occupant Restraint Controller (ORC) modules destined for service part usage are shipped in a state that inhibits the deployment of all supplemental restraint squib circuits (ORC unlocked) for safe, initial installation. Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2722 Chrysler indicates Occupant Restraint Controller Unlocked All Deployment Disabled.
Common causes: Common causes include Faulty Occupant Restraint Controller (ORC), Occupant Restraint Controller (ORC) harness is open or shorted, Occupant Restraint Controller (ORC) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,315

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 26, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2722 Chrysler Description

All Occupant Restraint Controller (ORC) modules destined for service part usage are shipped in a state that inhibits the deployment of all supplemental restraint squib circuits (ORC unlocked) for safe, initial installation. Once the ORC initialization procedure is performed (ORC locked), the Diagnostic Trouble Code (DTC) is removed from both active and stored status and Deployment Disable Status is no longer monitored by the ORC. Once locked, the ORC enters a full state of readiness and can no longer transition to the unlocked status. This DTC will be set as active for all service replacement ORC modules prior to the initialization procedure (ORC locked).

OBDII Code B2722 Chrysler - Occupant Restraint Controller Unlocked All Deployment Disabled - AutoCodes.com — B2722 Chrysler Code - Occupant Restraint Controller Unlocked All Deployment Disabled

What does this mean?

What are the Possible Causes of the DTC B2722 Chrysler?

Faulty Occupant Restraint Controller (ORC)
Occupant Restraint Controller (ORC) harness is open or shorted
Occupant Restraint Controller (ORC) circuit poor electrical connection

How to Fix the DTC B2722 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2722 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2722 Chrysler code?

Need more information on how to fix the B2722 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2722 Chrysler code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2722 Chrysler Code

1. What are the common symptoms of OBDII code B2722 in a Chrysler vehicle?

The common symptoms of OBDII code B2722 in a Chrysler vehicle include the airbag warning light staying illuminated on the dashboard and a message indicating "Occupant Restraint Controller Unlocked, All Deployment Disabled."

2. What could be the possible causes of OBDII code B2722 in a Chrysler vehicle?

The possible causes of OBDII code B2722 in a Chrysler vehicle may include a faulty Occupant Restraint Controller (ORC), a disconnected or damaged ORC wiring harness, or a software issue within the ORC system.

3. How can I diagnose OBDII code B2722 in my Chrysler vehicle?

Diagnosing OBDII code B2722 in a Chrysler vehicle typically involves using a diagnostic scanner to retrieve the fault codes from the ORC system and performing a thorough inspection of the ORC module and its associated wiring harness for any visible damage.

4. Is it safe to drive my Chrysler vehicle with OBDII code B2722 present?

It is not recommended to drive your Chrysler vehicle with OBDII code B2722 present, as this indicates a fault in the occupant restraint system, potentially compromising the effectiveness of the airbags in the event of a collision.

5. What are the repair options for OBDII code B2722 in a Chrysler vehicle?

Repair options for OBDII code B2722 in a Chrysler vehicle may include resetting the ORC module using a diagnostic scanner, repairing or replacing damaged wiring harnesses, and updating the software in the ORC system if necessary.

6. Can I reset OBDII code B2722 in my Chrysler vehicle by disconnecting the battery?

Disconnecting the battery may temporarily clear the fault code, but it is not a recommended method for resetting OBDII code B2722 in a Chrysler vehicle. It is best to address the root cause of the issue to prevent the code from reoccurring.

7. How much does it cost to repair OBDII code B2722 in a Chrysler vehicle?

The cost to repair OBDII code B2722 in a Chrysler vehicle can vary depending on the underlying cause of the issue. It is best to consult a professional mechanic for an accurate diagnosis and cost estimate.

8. Can I repair OBDII code B2722 in my Chrysler vehicle myself?

While some DIY enthusiasts may attempt to diagnose and repair OBDII code B2722, it is recommended to seek the assistance of a qualified mechanic or dealership due to the complexity of the occupant restraint system and the importance of proper repair.

9. Will OBDII code B2722 cause my Chrysler vehicle to fail an emissions test?

OBDII code B2722 is not directly related to emissions control, so it is unlikely to cause your Chrysler vehicle to fail an emissions test. However, it is still important to address the issue promptly for safety reasons.

10. How can I prevent OBDII code B2722 from occurring in my Chrysler vehicle in the future?

To prevent OBDII code B2722 from occurring in your Chrysler vehicle in the future, it is essential to perform regular maintenance checks on the occupant restraint system, avoid physical damage to the ORC module and wiring harness, and address any warning lights or messages promptly.